Home › Brake › BRAKE (FRONT) › FRONT BRAKE › from 2015.04
RM2030EQ _54 Brake _014652 BRAKE (FRONT) _0074518 FRONT BRAKE A

BRAKE (FRONT)  FRONT BRAKE  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the LH side and RH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 1.REMOVE FRONT WHEEL

Hide 2.DRAIN BRAKE FLUID

NOTICE:

If brake fluid leaks onto any painted surface, immediately wash it off.


Hide 47313A 3.SEPARATE FRONT FLEXIBLE HOSE

a.
C246328

Remove the union bolt and 2 gaskets, and separate the front flexible hose from the disc brake cylinder assembly.


Hide 47750 4.REMOVE DISC BRAKE CYLINDER ASSEMBLY

a.
C248003C01
1.29,1.0 1.465,1.161 0.175,0.161 10 *a 0.333,1.454 0.488,1.597 0.155,0.144 10 *b
*a Hold
*b Turn


Hold the front disc brake cylinder slide pin, and remove the 2 bolts and disc brake cylinder assembly.


Hide 5.REMOVE FRONT DISC BRAKE PAD

a.
C246330

Remove the 2 front disc brake pads from the front disc brake cylinder mounting.


Hide 47716 6.REMOVE FRONT DISC BRAKE PAD SUPPORT PLATE

a.
C246331

Remove the 2 front disc brake pad support plates from the front disc brake cylinder mounting.


Hide 47715A 7.REMOVE FRONT DISC BRAKE CYLINDER SLIDE PIN

a.
C246332

Remove the 2 front disc brake cylinder slide pins with the front disc brake bushing dust boot from each front disc brake cylinder mounting.


Hide 47775 8.REMOVE FRONT DISC BRAKE BUSHING DUST BOOT

a.

Remove the front disc brake bushing dust boot from the front disc brake cylinder slide pin.


Hide 47722 9.REMOVE FRONT DISC BRAKE CYLINDER MOUNTING

a.
C246333

Remove the 2 bolts and front disc brake cylinder mounting from the steering knuckle.


Hide 43512 10.REMOVE FRONT DISC

a.
C238490C03
2.302,1.271 3.052,1.198 3.052,1.198 2.281,1.198 true 3.073,1.125 3.365,1.469 0.292,0.344 10 *a
*a Matchmark


Put matchmarks on the front disc and the front axle hub.


b.

Remove the front disc.