Home › Brake › BRAKE (FRONT) › FRONT BRAKE FLEXIBLE HOSE › from 2015.04
RM2030EQ _54 Brake _014652 BRAKE (FRONT) _0074519 FRONT BRAKE FLEXIBLE HOSE A

BRAKE (FRONT)  FRONT BRAKE FLEXIBLE HOSE  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

If the left and right hoses are disconnected at the same time, be sure to place a mark on each hose to indicate its installation position.


HINT:
·

Use the same procedure for the LH side and RH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 1.REMOVE FRONT WHEEL

Hide 2.DRAIN BRAKE FLUID

NOTICE:

If brake fluid leaks onto any painted surface, immediately wash it off.


Hide 47313A 3.REMOVE FRONT FLEXIBLE HOSE

a.
C246328

Remove the union bolt and 2 gaskets, and separate the front flexible hose from the front disc brake cylinder assembly.


b.
C238495C06
2.023,0.979 2.175,1.122 0.152,0.143 10 *1 1.845,1.054 2.009,1.054 false
*1 Clip


Using a union nut wrench, disconnect the brake line while holding the front flexible hose with a wrench.

NOTICE:
·

Do not bend or damage the brake line.

·

Do not allow any foreign matter such as dirt or dust to enter the brake line from the connecting points.




c.

Remove the clip.


d.
C246372

Remove the bolt and front flexible hose from the front shock absorber assembly.