Home › Vehicle Exterior › LIGHTING (EXT) › HIGH MOUNTED STOP LIGHT ASSEMBLY › from 2015.04
RM2030EQ _59 Vehicle Exterior _014680 LIGHTING (EXT) _0074727 HIGH MOUNTED STOP LIGHT ASSEMBLY G

LIGHTING (EXT)  HIGH MOUNTED STOP LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81006 1.INSPECT CENTER STOP LIGHT SET

a.

w/ Rear Sunshade

i.
E142609C11
0.179,0.166 0.333,0.315 0.154,0.149 10 *a
*a Component without harness connected
(Center Stop Light Set)


Connect a positive (+) lead from the battery to terminal 1 and a negative (-) lead to terminal 2.


ii.

Check that the center stop light comes on.

OK:

The light comes on.


If the result is not as specified, replace the center stop light set.



b.

w/o Rear Sunshade

i.
E142609C12
0.179,0.166 0.333,0.315 0.154,0.149 10 *a
*a Component without harness connected
(Center Stop Light Set)


Connect a positive (+) lead from the battery to terminal 2 and a negative (-) lead to terminal 1.


ii.

Check that the center stop light comes on.

OK:

The light comes on.


If the result is not as specified, replace the center stop light set.