Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM › from 2015.04
RM2030EQ _58 Vehicle Interior _014667 METER / GAUGE / DISPLAY _0074615 METER / GAUGE SYSTEM D

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  FREEZE FRAME DATA  


FREEZE FRAME DATA


a.

Whenever a meter DTC is detected, the combination meter assembly stores the current vehicle state as freeze frame data.



CHECK FREEZE FRAME DATA


a.

Connect the GTS to the DLC3.


b.

Turn the engine switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Combination Meter / Trouble Codes.


e.

According to the GTS display, select a DTC that stored freeze frame data.


f.

Read the freeze frame data recorded when the DTC was stored.

Combination Meter
Tester Display Condition Displayed Item
B1507 Open in Turn Signal Circuit
·

TRIP

·

Elapsed time after engine switch on (IG)


B1508 Short in Turn Signal / Hazard Flasher Circuit
B150A*1, *2 Lost Communication with HMI-LAN
U0100 Lost Communication with ECM / PCM "A"
U0129 Lost Communication with Brake System Control Module
U0131 Lost Communication with Power Steering Control
U0142 Lost Communication with Body Control Module "B"
U0151 Lost Communication with Restraints Control Module
U0163*1 Lost Communication with Navigation Control Module
U023A*3 Lost Communication with Front Camera Module

*1: for Navigation Receiver Type

*2: for Radio and Display Type

*3: w/ Lane Departure Alert System




CLEAR FREEZE FRAME DATA


NOTICE:

Clearing the DTCs will also clear the freeze frame data.


a.

Connect the GTS to the DLC3.


b.

Turn the engine switch on (IG).