Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio and Display Type) › from 2015.04
RM2030EQ _56 Audio / Visual / Telematics _014658 AUDIO / VIDEO _0076716 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  Sound Signal Circuit between Radio Receiver and Stereo Jack Adapter  


DESCRIPTION

The No. 1 stereo jack adapter assembly sends the sound signal from an external device to the radio and display receiver assembly via this circuit.

The sound signal that has been sent is amplified by the radio and display receiver assembly and then is sent to the speakers.

If there is an open or short in the circuit, sound cannot be heard from the speakers even if there is no malfunction in the radio and display receiver assembly or speakers.

WIRING DIAGRAM

E277819E53
0.865,0.635 1.479,0.833 0.615,0.198 10 false AUXO 0.948,1.823 1.563,2.021 0.615,0.198 10 false ALO 0.833,2.417 1.448,2.615 0.615,0.198 10 false ASGN 0.844,3.01 1.458,3.208 0.615,0.198 10 false AGND 0.927,1.229 1.542,1.427 0.615,0.198 10 false ARO 1.333,0.521 1.948,0.719 0.615,0.198 10 false 9 1.333,1.104 1.948,1.302 0.615,0.198 10 false 6 1.333,1.698 1.948,1.896 0.615,0.198 10 false 7 1.333,2.281 1.948,2.479 0.615,0.198 10 false 8 1.323,2.885 1.938,3.083 0.615,0.198 10 false 10 3.271,2.813 3.948,3.01 0.677,0.198 10 false (Shielded) 5.948,0.635 6.563,0.833 0.615,0.198 10 false ADPG 5.958,1.229 6.573,1.427 0.615,0.198 10 false VAR+ 5.958,1.813 6.573,2.01 0.615,0.198 10 false VAL+ 5.958,2.417 6.573,2.615 0.615,0.198 10 false VA- 5.958,3.01 6.573,3.208 0.615,0.198 10 false AGND 5.708,0.531 6.323,0.729 0.615,0.198 10 false 25 5.708,1.115 6.323,1.313 0.615,0.198 10 false 26 5.719,1.708 6.333,1.906 0.615,0.198 10 false 28 5.719,2.313 6.333,2.51 0.615,0.198 10 false 27 5.708,2.896 6.323,3.094 0.615,0.198 10 false 11 0.479,3.438 1.094,3.635 0.615,0.198 10 false I146 0.479,3.625 1.698,4.188 1.219,0.563 10 false No. 1 Stereo Jack Adapter Assembly 5.906,3.458 6.521,3.656 0.615,0.198 10 false I155 5.906,3.635 7.135,4.083 1.229,0.448 10 false Radio and Display Receiver Assembly

PROCEDURE

1.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - NO. 1 STEREO JACK ADAPTER ASSEMBLY)
a.

Disconnect the I155 radio and display receiver assembly connector.


b.

Disconnect the I146 No. 1 stereo jack adapter assembly connector.


c.
E227392C28
1.5,0.219 1.958,0.5 0.458,0.281 1.5,2.271 1.958,2.552 0.458,0.281 2.115,1.417 2.781,1.177 false 2.219,1.635 2.073,1.958 false 2.115,1.635 1.594,1.958 false 2.448,1.635 2.969,1.958 false 2.333,1.635 2.479,1.958 false 1.583,3.875 1.177,4.229 false 1.875,3.875 2.271,4.229 false 2.042,3.833 2.49,3.833 false 1.385,3.833 0.865,3.833 false 1.729,3.875 1.729,4.417 false 2.823,1.083 3.25,1.229 0.427,0.146 10 false AGND 1.813,1.979 2.323,2.365 0.51,0.385 10 false VAR+ 1.156,1.885 1.719,2.167 0.563,0.281 10 false ADPG 2.885,1.979 3.25,2.125 0.365,0.146 10 false VAL+ 2.417,1.979 2.667,2.125 0.25,0.146 10 false VA- 0.177,0.167 0.604,0.771 0.427,0.604 10 false *a 1.604,0.281 2.073,0.531 0.469,0.25 10 false I155 2.531,3.76 2.958,3.906 0.427,0.146 10 false AGND 0.927,4.26 1.25,4.406 0.323,0.146 10 false ALO 2.156,4.26 2.573,4.406 0.417,0.146 10 false AUXO 0.177,2.229 0.563,2.542 0.385,0.313 10 false *b 0.458,3.74 0.813,3.885 0.354,0.146 10 false ARO 1.49,4.427 1.917,4.573 0.427,0.146 10 false ASGN 1.625,2.333 2.125,2.594 0.5,0.26 10 false I146
*a Front view of wire harness connector
(to Radio and Display Receiver Assembly)
*b Front view of wire harness connector
(to No. 1 Stereo Jack Adapter Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
I155-25 (ADPG) - I146-9 (AUXO) Always Below 1 Ω
I155-11 (AGND) - I146-10 (AGND) Always Below 1 Ω
I155-26 (VAR+) - I146-6 (ARO) Always Below 1 Ω
I155-28 (VAL+) - I146-7 (ALO) Always Below 1 Ω
I155-27 (VA-) - I146-8 (ASGN) Always Below 1 Ω
I155-25 (ADPG) - Body ground Always 10 kΩ or higher
I155-11 (AGND) - Body ground Always 10 kΩ or higher
I155-26 (VAR+) - Body ground Always 10 kΩ or higher
I155-28 (VAL+) - Body ground Always 10 kΩ or higher
I155-27 (VA-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR