Home › Brake › BRAKE (FRONT) › FRONT BRAKE › from 2015.04
RM2030EQ _54 Brake _014652 BRAKE (FRONT) _0074518 FRONT BRAKE A

BRAKE (FRONT)  FRONT BRAKE  REASSEMBLY  


PROCEDURE

Hide 47547B 1.TEMPORARILY TIGHTEN FRONT DISC BRAKE BLEEDER PLUG

HINT:

Fully tighten the front disc brake bleeder plug after bleeding.


Hide 31478B 2.INSTALL FRONT DISC BRAKE BLEEDER PLUG CAP

Hide 3.INSTALL PISTON SEAL

a.

Apply a light layer of lithium soap base glycol grease to the entire circumference of a new piston seal.


b.

Install the piston seal to the front disc brake cylinder.

NOTICE:

Securely install the piston seal to the groove of the front disc brake cylinder.



Hide 4.INSTALL CYLINDER BOOT

a.
C239545C02
2.511,0.401 2.667,0.557 0.156,0.156 10 *1 2.516,1.352 2.679,1.508 0.163,0.156 10 *2 2.191,0.477 2.48,0.477 false 2.077,1.44 2.48,1.44 false
*1 Cylinder Boot
*2 Front Disc Brake Piston
V100155

Lithium Soap Base Glycol Grease


Apply a light layer of lithium soap base glycol grease to the entire circumference of a new cylinder boot and front disc brake piston.


b.
C248018

Install the cylinder boot to the front disc brake piston.


Hide 47731 5.INSTALL FRONT DISC BRAKE PISTON

a.
C145788C01
1.133,2.476 1.297,2.637 0.164,0.161 10 *1 1.421,2.832 1.607,2.993 0.186,0.161 10 *2 0.731,2.699 0.862,2.568 0.862,2.568 1.101,2.568 false 0.929,3.182 1.186,2.925 1.186,2.925 1.377,2.925 false
*1 Front Disc Brake Piston
*2 Cylinder Boot


Install the cylinder boot securely to the grooves of the front disc brake cylinder.

NOTICE:
·

Securely install the cylinder boot into the groove of the disc brake cylinder and front disc brake piston.

·

Do not damage the cylinder boot.




b.

Push in the front disc brake piston by hand and install the cylinder boot onto the grooves of the front disc brake piston.