Home › Brake › BRAKE (REAR) › REAR BRAKE › from 2015.04
RM2030EQ _54 Brake _014653 BRAKE (REAR) _0074520 REAR BRAKE A

BRAKE (REAR)  REAR BRAKE  DISASSEMBLY  


PROCEDURE

Hide 47731B 1.REMOVE REAR DISC BRAKE PISTON

a.
C246357

Place a piece of cloth between the rear disc brake piston and rear disc brake cylinder assembly.


b.

Apply compressed air to remove the rear disc brake piston from the rear disc brake cylinder assembly.

CAUTION:

Do not place your fingers in front of the rear disc brake piston when using compressed air.


NOTICE:

Do not allow any brake fluid to spatter.



Hide 2.REMOVE CYLINDER BOOT

a.

Remove the cylinder boot from the rear disc brake cylinder assembly.


Hide 3.REMOVE PISTON SEAL

a.
C143448C01
2.083,1.817 2.251,1.965 0.168,0.148 10 *1 1.928,1.263 2.17,1.506 2.17,1.506 2.17,1.807 false
*1 Vinyl Tape


Using a screwdriver with its tip wrapped with vinyl tape, remove the piston seal from the rear disc brake cylinder.

NOTICE:

Do not damage the inner surface or piston seal groove of the disc brake cylinder.



Hide 31478C 4.REMOVE REAR DISC BRAKE BLEEDER PLUG CAP

Hide 47547C 5.REMOVE REAR DISC BRAKE BLEEDER PLUG