Home › Vehicle Exterior › LIGHTING (EXT) › REAR LIGHT ASSEMBLY › from 2016.05
RM2030EQ _59 Vehicle Exterior _014680 LIGHTING (EXT) _0074725 REAR LIGHT ASSEMBLY A

LIGHTING (EXT)  REAR LIGHT ASSEMBLY  DISASSEMBLY  


PROCEDURE

Hide 81550N 1.REMOVE BACK-UP LIGHT BULB (w/o Rear Fog Light)

a.
E245849

Turn the back-up light socket with the back-up light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.


b.

Remove the back-up light bulb from the back-up light socket.


Hide 81550N 2.REMOVE BACK-UP LIGHT BULB (w/ Rear Fog Light)

a.
E236330

Turn the rear light socket and wire with the back-up light bulb in the direction indicated by the arrow shown in the illustration and disconnect them as a unit.


b.

Remove the back-up light bulb from the rear light socket and wire.


Hide 81550F 3.REMOVE TAIL LIGHT BULB (w/o Rear Fog Light)

a.
E245851

Turn the tail light socket with the tail light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.


b.

Remove the tail light bulb from the rear light socket.


Hide 81550F 4.REMOVE TAIL LIGHT BULB (w/ Rear Fog Light)

a.
E236331

Turn the rear light socket and wire with the tail light bulb in the direction indicated by the arrow shown in the illustration and disconnect them as a unit.


b.

Remove the tail light bulb from the rear light socket and wire.


Hide 81550Q 5.REMOVE NO. 1 REAR FOG LIGHT BULB (w/ Rear Fog Light)

a.
E227538

Disengage the clamp.


b.

Turn the rear light socket and wire with the No. 1 rear fog light bulb in the direction indicated by the arrow shown in the illustration and remove them as a unit.


c.

Remove the No. 1 rear fog light bulb from the rear light socket and wire.


Hide 81594A 6.REMOVE REAR LIGHT GASKET

a.
E245853

Remove the rear light gasket.

NOTICE:
·

Be sure to remove all the traces of the old gasket from the vehicle body.

·

Do not reuse the removed gasket. Be sure to install a new rear light gasket to prevent water ingress.