Home › Vehicle Exterior › LIGHTING (EXT) › REAR LIGHT ASSEMBLY › from 2016.05
RM2030EQ _59 Vehicle Exterior _014680 LIGHTING (EXT) _0074725 REAR LIGHT ASSEMBLY A

LIGHTING (EXT)  REAR LIGHT ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 1.INSTALL REAR LIGHT ASSEMBLY (w/o Rear Fog Light)

a.
E245848N01
1.094,1.688 1.229,1.896 0.135,0.208 10 true A 1.823,1.396 1.979,1.594 0.156,0.198 10 true A 1.781,1.792 1.948,1.979 0.167,0.188 10 true B 2.344,1.74 2.5,1.948 0.156,0.208 10 true B

Install the rear light assembly with the 4 nuts.

Torque:
Nut (A) : 3.6 N*m (37 kgf*cm, 32 in.*lbf)
Nut (B) : 4.1 N*m (42 kgf*cm, 36 in.*lbf)


b.

Connect the 2 connectors.


Hide 2.INSTALL REAR LIGHT ASSEMBLY (w/ Rear Fog Light)

a.
E227533N02
0.5,1.844 0.667,2.021 0.167,0.177 10 true A 0.906,1.833 1.083,2.01 0.177,0.177 10 true A 1.656,1.917 1.813,2.104 0.156,0.188 10 true B 2.365,1.865 2.583,2.042 0.219,0.177 10 true B

Install the rear light assembly with the 4 nuts.

Torque:
Nut (A) : 3.6 N*m (37 kgf*cm, 32 in.*lbf)
Nut (B) : 4.1 N*m (42 kgf*cm, 36 in.*lbf)


b.

Engage the clamp.


c.

Connect the connector.


Hide 64719A 3.INSTALL LUGGAGE COMPARTMENT DOOR COVER