Home › Vehicle Interior › SEAT BELT › CHILD RESTRAINT SEAT ANCHOR BRACKET › from 2016.05
RM2030EQ _58 Vehicle Interior _014671 SEAT BELT _0268738 CHILD RESTRAINT SEAT ANCHOR BRACKET A

SEAT BELT  CHILD RESTRAINT SEAT ANCHOR BRACKET  INSTALLATION  


PROCEDURE

Hide 1.INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH (for LHD)

a.

Install the child restraint seat anchor bracket sub-assembly LH with the 2 nuts.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


Hide 2.INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH (for RHD)

a.

Install the child restraint seat anchor bracket sub-assembly LH with the 2 nuts.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


b.

Engage the clamp.


c.

Connect the connector.


Hide 3.INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY RH (for LHD)

a.

Install the child restraint seat anchor bracket sub-assembly RH with the 2 nuts.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


Hide 4.INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY RH (for RHD)

a.

Install the child restraint seat anchor bracket sub-assembly RH with the 2 nuts.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


b.

Engage the clamp.


c.

Connect the connector.


Hide 5.INSTALL REAR SEATBACK ASSEMBLY LH

Hide 6.INSTALL REAR SEATBACK ASSEMBLY RH

Hide 7.INSTALL REAR SIDE SEATBACK ASSEMBLY LH

Hide 8.INSTALL REAR SIDE SEATBACK ASSEMBLY RH

Hide 72693 9.INSTALL REAR SEAT CUSHION LOCK HOOK

Hide 10.INSTALL REAR SEAT CUSHION ASSEMBLY