84746A
1.INSPECT TIRE PRESSURE WARNING RESET SWITCH
Remove the tire pressure warning reset switch.
Click hereSuspension>TIRE PRESSURE MONITORING>TIRE PRESSURE WARNING RESET SWITCH>REMOVAL
| *a | Component without harness connected
(Tire Pressure Warning Reset Switch) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 9 (INT) - 6 (E) | Tire pressure warning reset switch is pushed | Below 1 Ω |
| Tire pressure warning reset switch is not pushed | 10 kΩ or higher |