Home › General › INTRODUCTION › FEATURES › 2012.02–2015.04
NM2040EQ _V1 General _014480 INTRODUCTION _0073577 FEATURES GE GENERAL F

INTRODUCTION  FEATURES  GENERAL  PERFORMANCE  


OUTLINE


a.

TOYOTA Hybrid System-II (THS-II)

i.

This system optimally performs cooperative control of the 2AR-FXE engine, and Motor Generator No. 1 (MG1) and Motor Generator No. 2 (MG2) in the P314 hybrid vehicle transaxle assembly that provides excellent transmission performance. Furthermore, this system uses a high-output HV battery with a nominal voltage of DC 244.8 V, and a variable-voltage system in which a boost converter boosts the operating voltage of the system to a maximum voltage of DC 650 V.

V103138
2.156,3.25 2.156,3.927 true 1.844,2.75 1.5,3.042 1.5,3.042 1.5,3.958 true 4.875,2.042 4.875,3.552 true 1.729,2.281 1.406,1 1.406,1 1.083,1 true 0.896,0.927 1.115,1.125 0.219,0.198 10 false *1 1.427,3.979 1.698,4.188 0.271,0.208 10 false *2 2.094,3.969 2.365,4.177 0.271,0.208 10 false *3 4.813,3.573 5.083,3.781 0.271,0.208 10 false *4
*1 2AR-FXE Engine *2 Inverter with Converter Assembly
*3 P314 Hybrid Vehicle Transaxle Assembly *4 HV Battery Assembly


System Performance
Maximum System Output* kW 151

*: Maximum system output is engine output and MG2 output controlled by THS-II. MG2 output depends on power supplied by the HV battery.



b.

2AR-FXE Engine

i.

The 2AR-FXE is an in-line 4-cylinder, 2.5-liter, 16-valve DOHC engine.


ii.

This engine uses a high-expansion ratio Atkinson cycle, Variable Valve Timing-intelligent (VVT-i) system, Electric Throttle Control System-intelligent (ETCS-i) and Exhaust Gas Recirculation (EGR) system employing a highly efficient EGR cooler. In addition, use of an electric engine water pump assembly has eliminated the V-ribbed belt. Thus, improved engine performance, quietness, fuel economy, and cleaner emissions have been achieved.

V101855

Item Specification
No. of Cyls. & Arrangement 4-cylinder, In-line
Valve Mechanism 16-valve, DOHC with VVT-i
Fuel System SFI
Displacement cm3 (cu. in.) 2494 (152.2)
Max. Output (EEC) kW@rpm 118@5700
Max. Torque (EEC) N*m@rpm 213@4500



c.

P314 Hybrid Vehicle Transaxle Assembly

i.

The P314 hybrid vehicle transaxle assembly contains Motor Generator No. 1 (MG1) and Motor Generator No. 2 (MG2).

V101857C01
2.802,0.948 1.646,0.948 true 5.365,0.938 4.208,0.938 true 5.365,0.833 5.667,1.083 0.302,0.25 10 false *1 1.458,0.844 1.76,1.094 0.302,0.25 10 false *2
*1 Motor Generator No. 1 (MG1) *2 Motor Generator No. 2 (MG2)


Item Specification
Motor Generator No. 1 (MG1) Motor Generator No. 2 (MG2)
Type Permanent Magnet Motor Permanent Magnet Motor
Function Generate, Engine Starter Generate, Drive Wheels
Cooling System Water-cooled Water-cooled
Maximum Output kW - 105
Maximum Torque N*m - 270



d.

Suspension

i.

A MacPherson strut type independent suspension is used for the front.


ii.

A dual link MacPherson strut type independent suspension is used for the rear.

V103137



e.

Steering

i.

The Electric Power Steering (EPS) system uses a power steering motor, a power steering torque sensor and a reduction mechanism that are built into the steering column assembly to generate assist torque, in order to assist the driver's steering effort.

V103018
3.26,2.469 2.844,3.635 2.844,3.635 2.531,3.635 true 3.438,1.552 3.052,0.458 3.052,0.458 2.76,0.458 true 2.583,0.375 2.74,0.563 0.156,0.188 10 false *2 2.354,3.531 2.51,3.719 0.156,0.188 10 false *1
*1 Steering Gear Assembly *2 Steering Column Assembly




f.

Brake

Item Specification
Front Brake Type Ventilated Disc
Rotor Size (D x T)* mm (in.) 296 x 28 (11.65 x 1.10)
Rear Brake Type Solid Disc
Rotor Size (D x T)* mm (in.) 281 x 10 (11.06 x 0.39)
Brake Control System ABS with EBD, Brake Assist, TRC, VSC and Hill-start Assist Control

*: Diameter x Thickness