OUTLINE
A P314 hybrid vehicle transaxle assembly is used.
Containing a Motor Generator No. 2 (MG2) for driving the vehicle and a Motor Generator No. 1 (MG1) for generating electrical power, this transaxle uses a continuously variable transmission mechanism with a compound gear unit that achieves smooth and quiet operation.
This hybrid vehicle transaxle assembly consists primarily of MG1, MG2, a compound gear unit, a transmission input damper assembly, a counter gear, a final gear, a differential gear unit and an oil pump.
This hybrid vehicle transaxle assembly has a 3-shaft configuration. The compound gear unit, a transmission input damper assembly, an oil pump, MG1 and MG2 are provided on the input shaft. The counter driven gear and the final drive gear are provided on the second shaft. The final driven gear and the differential gear unit are provided on the third shaft.
The engine, MG1 and MG2 are mechanically joined via the compound gear unit.
| *1 | MG1 | *2 | MG2 |
| *3 | Compound Gear Unit | *4 | Transmission Input Damper Assembly |
| *5 | Counter Driven Gear | *6 | Final Drive Gear |
| *7 | Final Driven Gear | *8 | Differential Gear Unit |
| *9 | Oil Pump | - | - |
SPECIFICATION
| Item | Specification | ||
|---|---|---|---|
| Transaxle Type | P314 | ||
| Shift Position | P / R / N / D / B | ||
| Compound Gear Unit | Power Split Planetary Gear Unit | No. of Sun Gear Teeth | 30 |
| No. of Pinion Gear Teeth | 23 | ||
| No. of Ring Gear Teeth | 78 | ||
| Motor Speed Reduction Planetary Gear Unit | No. of Sun Gear Teeth | 23 | |
| No. of Pinion Gear Teeth | 18 | ||
| No. of Ring Gear Teeth | 57 | ||
| Counter Gear | No. of Drive Gear Teeth | 54 | |
| No. of Driven Gear Teeth | 55 | ||
| Final Gear | No. of Drive Gear Teeth | 23 | |
| No. of Driven Gear Teeth | 80 | ||
| Total Speed Reduction Ratio*1 | 3.542 | ||
| Oil Type | TOYOTA Genuine ATF WS | ||
| Fluid Capacity | Liters (US qts, Imp.qts) | 3.6 (3.8, 3.2) | |
| Weight (Reference)*2 | kg (lb) | 121 (267) | |
*1: The ratio of the combination of the counter and final gears.
*2: The weight shown is with the transaxle fully filled with fluid.