Home › Drivetrain › AXLE AND DIFFERENTIAL › AXLE SYSTEM
NM2040EQ _52 Drivetrain _014493 AXLE AND DIFFERENTIAL _0073591 AXLE SYSTEM GE GENERAL F

AXLE AND DIFFERENTIAL  AXLE SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

Front Axle

i.

Compact and highly rigid double-row angular ball bearings are used on the front axle. The double-row angular ball bearings and the axle hub are integrated to ensure high rigidity, thus realizing excellent driving stability and braking stability.

X105845
3.167,1.24 3.604,0.26 3.604,0.26 3.979,0.26 true 3.771,1.917 4.313,0.688 4.313,0.688 4.771,0.688 true 3.969,1.896 4.406,0.917 4.406,0.917 4.781,0.917 true 4.146,2.344 4.458,3.188 4.458,3.188 4.719,3.188 true 4.031,0.198 4.292,0.438 0.26,0.24 10 false *1 4.802,0.583 5.063,0.823 0.26,0.24 10 false *2 4.823,0.823 5.083,1.063 0.26,0.24 10 false *2 4.75,3.083 5.01,3.323 0.26,0.24 10 false *3
*1 Steering Knuckle *2 Double-row Angular Ball Bearing
*3 Front Axle Hub Sub-assembly - -




b.

Rear Axle

i.

Compact and highly rigid double-row angular ball bearings are used on the rear axle. The double-row angular ball bearings and the axle hub are integrated to ensure high rigidity, thus realizing excellent driving stability and braking stability.


ii.

Due to an active type speed sensor being adopted, a sensor rotor is provided on the hub bearing inner race.

X107122
4.302,2 4.802,1.25 4.802,1.25 5.094,1.25 true 4.479,2 4.875,1.49 4.875,1.49 5.115,1.49 false 4.625,2.313 5.573,2.313 true 4.094,2.385 2.781,1.865 2.781,1.865 2,1.865 true 5.135,1.167 5.323,1.333 0.188,0.167 10 false *1 5.156,1.417 5.344,1.583 0.188,0.167 10 false *1 5.615,2.24 5.802,2.406 0.188,0.167 10 false *2 1.823,1.802 2.01,1.969 0.188,0.167 10 false *3
*1 Double-row Angular Ball Bearing *2 Sensor Rotor
*3 Rear Axle Hub and Bearing Assembly - -


NOTICE:
·

Do not place magnetized objects close to the surface of the sensor rotor.

·

Do not allow any iron particles, iron sand, dust, debris, or oil to come in contact with the surface of the sensor rotor.