Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE IMMOBILISER SYSTEM
NM2040EQ _58 Vehicle Interior _014509 THEFT DETERRENT / KEYLESS ENTRY _0073614 ENGINE IMMOBILISER SYSTEM GE GENERAL F

THEFT DETERRENT / KEYLESS ENTRY  ENGINE IMMOBILISER SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The engine immobiliser system compares the ID code that is registered in the certification ECU (smart key ECU assembly) with the ID code of the transponder chip that is embedded in the electrical key transmitter sub-assembly. If these ID code match, the system unsets and the certification ECU (smart key ECU assembly) transmits a steering unlock request signal to the steering lock ECU (steering lock actuator assembly). Thus, the certification ECU (smart key ECU assembly) and the power management control ECU communicate with each other enabling the hybrid system to start.

HINT:

When replacing the power management control ECU or making a new electrical key transmitter sub-assembly, key recognition code(s) must be registered. For details, refer to the Service Bulletin.