Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM › 2012.02–2015.04
NM2040EQ _58 Vehicle Interior _014511 METER / GAUGE / DISPLAY _0073617 METER / GAUGE SYSTEM GE GENERAL F

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

Combination Meter Assembly

i.

An Optitron type combination meter assembly is provided.


ii.

The combination meter assembly has a built-in meter ECU and buzzer.


iii.

The 2 Liquid Crystal Display (LCD) and a multi-information display are provided for the combination meter assembly.

Y111644
0.875,2.917 0.875,3.323 true 1.844,2.823 1.844,3.323 true 6.302,2.896 6.302,3.302 true 5.271,2.813 5.271,3.313 true 3.583,2.833 3.583,3.292 true 0.802,3.344 1.104,3.594 0.302,0.25 10 false *1 1.771,3.333 2.073,3.583 0.302,0.25 10 false *2 6.219,3.323 6.521,3.573 0.302,0.25 10 false *4 5.198,3.333 5.5,3.583 0.302,0.25 10 false *2 3.51,3.313 3.813,3.563 0.302,0.25 10 false *3
*1 Rheostat Switch *2 LCD
*3 Multi-information Display *4 ODO/TRIP Switch





MAIN FEATURES


a.

Combination Meter Assembly

i.

An illumination control which allows for anticipation of a pleasant drive is used. If the power switch is turned on (IG), the illumination control operates as follows:

1.

When the power switch is turned on (IG), the opening display appears on the multi-information display.

2.

The following illuminations fade in: the speedometer, Hybrid System Indicator, fuel gauge, fuel consumption meter needle indicator, 2 LCD displays and meter panel illumination.

3.

When the power switch is turned off, all the illuminations fade out. During this period, the multi-information display shows the Eco drive level for 3 seconds.

Y113389
1.292,4.094 1.448,4.292 0.156,0.198 10 false .
V100136

Power switch off to on (IG)
V100135

Power switch on (IG) to off





b.

Hybrid System Indicator

i.

The Hybrid System Indicator displays the total of the HV battery and engine output as the hybrid system output.


ii.

The scale for the Hybrid System Indicator is divided into 3 areas (Charge, Eco, Power). The role of each area is as follows.

Area Function
Charge The Charge area indicates when energy regeneration is occurring.
Eco
·

The Eco area indicates when the vehicle is being driven Eco-friendly.

·

The Hybrid Eco area indicates that the vehicle is driven in a manner that promotes frequent motor only operation. (Based on various conditions, the power management control ECU controls if the engine should be stopped to enhance fuel efficiency.)


Power The Power area indicates that the Eco-friendly driving range is being exceeded (during full power driving etc.).

Y113376
2.293,1.782 2.495,1.988 0.201,0.206 10 *1 2.358,0.744 2.56,0.95 0.201,0.206 10 *2 3.334,0.484 3.535,0.69 0.201,0.206 10 *3 4.152,0.397 4.353,0.603 0.201,0.206 10 *4
*1 Charge Area *2 Hybrid Eco Area
*3 Eco Area *4 Power Area




c.

Fuel Consumption Gauge

i.

A needle indicator type average fuel consumption gauge is provided on the combination meter assembly. The needle indicator indicates the value in accordance with the average fuel consumption value displayed on the multi-information display.


ii.

An instantaneous fuel consumption gauge is provided. This gauge is a segment type indicator and is arranged outside the average fuel consumption gauge. This arrangement enables the driver to check the average and instantaneous fuel consumption simultaneously, assisting eco-friendly driving.

Y113377
5.042,1.927 4.76,2.521 4.76,2.521 4.208,2.521 true 5.646,1.615 5.906,1.052 5.906,1.052 6.177,1.052 true 4.021,2.406 4.281,2.635 0.26,0.229 10 false *1 6.208,0.948 6.458,1.177 0.25,0.229 10 false *2
*1 Average Fuel Consumption Gauge *2 Instantaneous Fuel Consumption Gauge




d.

LCD

i.

2 LCDs are provided in the combination meter assembly. Each display shows the following information.

Item Outline
LCD (Hybrid System Indicator Side)
·

The following information items are always displayed.

·

Shift Position Indicator

·

Engine Coolant Temperature Gauge (segment type display)

·

Ambient Temperature


·

When the rheostat switch is pressed, the engine coolant temperature gauge will change into meter illumination adjustment mode. The meter illumination can be switched between 6 levels.


LCD (Fuel Gauge Side)
·

The following information items can be displayed. The item shown can change by pressing the ODO/TRIP switch.

·

Odometer

·

Trip Meter A

·

Trip Meter B






e.

Multi-information Display

i.

The multi-information display shows the following information.

Mode Outline
Cruise Information
·

The item shown can be changed by pushing the DISP switch in the steering pad switch assembly.

·

In cruise information mode, the following information can be displayed:

·

Cruising Range and Average Fuel Consumption

·

Average Vehicle Speed and Elapsed Time

·

Eco Drive Level

·

Energy Monitor

·

Settings

·

Blank Screen



Warning The warning display will interrupt the multi-information display immediately when a warning occurs.
Customization The following display, performance or illumination of the combination meter assembly can be customized:
·

Language

·

Instantaneous Fuel Consumption Gauge

·

EV Drive Indicator Light