Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM
NM2040EQ _58 Vehicle Interior _014514 HEATING / AIR CONDITIONING _0073621 AIR CONDITIONING SYSTEM GE GENERAL F

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The automatic air conditioning system uses left and right independent temperature control and neural network control to enhance comfort.



SPECIFICATION


a.

Performance

Heater Heater Output W 5850
Air Flow Volume m3/h 380
Power Consumption W 220
Cooler Cooling Capacity W 6100
Air Flow Volume m3/h 530
Power Consumption W 260


b.

Ventilation and Heater Core

Heater Radiator Unit Sub-assembly Type Straight Flow Aluminum (SFA) -II
Size W x H x L mm (in.) 201.5 x 150 x 27 (7.9 x 5.9 x 1.1)
Fin Pitch mm (in.) 1.5 (0.06)
Blower with Fan Motor Sub-assembly Motor Type BMM - K70
Fan Type Semi Sirocco
Fan Size (Dia. x H) mm (in.) 165 x 70 (6.5 x 2.8)


c.

Air Conditioning

Cooler Condenser Assembly Type Multi-Flow (MF)-IV
Size W x H x L mm (in.) 726 x 261.4 x 22
(28.6 x 10.3 x 0.9)
Fin Pitch mm (in.) 2.7 (0.11)
Compressor with Motor Assembly Type ES27
Compressor Oil Type cc ND11
Refrigerant Type HFC 134a
Charge Volume g 480 to 580
Evaporator Type Revolutionary super-slim Structure (RS)
Size W x H x L mm (in.) 266.3 x 251 x 38 (10.5 x 9.9 x 1.5)
Fin Pitch mm (in.) 2.6 (0.10)



MAIN FEATURES


a.

The air conditioning system has the following features:

High Performance
·

Neural network control is used so passengers can control the air conditioning accurately for maximum comfort.

·

The Positive Temperature Coefficient (PTC) heater system is used. This system contains a PTC heater that heats the air that has passed through the heater radiator unit sub-assembly to ensure proper heater performance.


Lightweight
·

An air conditioning harness assembly with a built-in IC is used in a lightweight wire harness design to allow a reduced number of wires.

·

The use of this connector means that pulse pattern type servo motors are used.


Others The following parts are used to ensure high cooling performance while realizing a compact and lightweight construction.
·

Semi-center Location Air Conditioning Unit

·

Revolutionary Super-slim Structure (RS) Evaporator

·

Straight Flow Aluminum (SFA)-II Heater Radiator Sub-assembly

·

Multi-Flow (MF)-IV Sub-cool Condenser