Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › HYBRID CONTROL SYSTEM
NM2040EQ _51 Engine / Hybrid System _014483 HYBRID / BATTERY CONTROL _0073580 HYBRID CONTROL SYSTEM DE DETAILS F

HYBRID / BATTERY CONTROL  HYBRID CONTROL SYSTEM  DETAILS  INVERTER WATER PUMP  


CONSTRUCTION


a.

A compact and highly efficient electric type inverter water pump assembly is used.


b.

A high output brushless type motor is used for the pump motor, furthermore, bearings that support the shaft at both ends are employed, thus suppressing noise and vibration.


c.

The pump motor is controlled over 3 levels by the duty cycle signal from the power management control ECU.

W105566
5.219,2.375 3.74,2.375 true 3.875,3.094 3.875,3.417 true 3.427,2.104 1.938,2.104 true 3.792,1.771 4,1.063 4,1.063 4.458,1.063 true 1.771,2 2.094,2.26 0.323,0.26 10 false *1 4.479,0.938 4.802,1.198 0.323,0.26 10 false *2 5.25,2.271 5.573,2.531 0.323,0.26 10 false *3 3.802,3.427 4.125,3.688 0.323,0.26 10 false *4
*1 Shaft *2 Impeller
*3 Rotor *4 Motor Controller
V100135

HV Coolant Inlet
V100136

HV Coolant Outlet