Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › HYBRID CONTROL SYSTEM
NM2040EQ _51 Engine / Hybrid System _014483 HYBRID / BATTERY CONTROL _0073580 HYBRID CONTROL SYSTEM DE DETAILS F

HYBRID / BATTERY CONTROL  HYBRID CONTROL SYSTEM  DETAILS  POWER CABLE (FRAME WIRE)  


CONSTRUCTION


a.

The power cable (frame wire) is a set of high-voltage, high-amperage cables that connect the HV battery with the inverter with converter assembly, the inverter with converter assembly with MG1 and MG2, and the inverter with converter assembly with the compressor with motor assembly.


b.

The power cable (frame wire) is made of shielded cables in order to reduce electromagnetic interference.


c.

For identification purposes, the high-voltage wiring harness and connectors are color-coded orange to distinguish them from those of the ordinary low-voltage wiring.

W105565
1.094,2.385 1.417,2.615 0.323,0.229 10 false *2 1.354,1.177 1.677,1.406 0.323,0.229 10 false *1 1.781,2.927 2.104,3.156 0.323,0.229 10 false *3 5.063,1.865 5.385,2.094 0.323,0.229 10 false *7 5.615,1.875 5.885,2.052 0.271,0.177 10 false *8 5.052,1.073 5.375,1.302 0.323,0.229 10 false *6 1.781,2.354 2.104,2.583 0.323,0.229 10 false *4 1.781,2.615 2.104,2.844 0.323,0.229 10 false *5
*1 Compressor with Motor Assembly *2 Inverter with Converter Assembly
*3 Hybrid Vehicle Transaxle Assembly *4 MG1
*5 MG2 *6 Hybrid Battery Junction Block Assembly
*7 HV Battery Assembly *8 Service Plug Grip
V100143

Power Cable (Frame Wire) - -