Home › Engine / Hybrid System › 2AR-FXE ENGINE MECHANICAL › ENGINE UNIT
NM2040EQ _51 Engine / Hybrid System _014484 2AR-FXE ENGINE MECHANICAL _0073581 ENGINE UNIT DE DETAILS F

2AR-FXE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  VALVE MECHANISM  


CONSTRUCTION


a.

Each cylinder of this engine has 2 intake valves and 2 exhaust valves. Intake and exhaust efficiency is increased due to the larger total port areas.


b.

This engine uses No. 1 valve rocker arm sub-assemblies with built-in needle bearings. This reduces the friction that occurs between the cams and the no. 1 valve rocker arm sub-assemblies that push the valves down, thus improving fuel economy.


c.

Valve lash adjuster assemblies, which maintain a constant zero valve clearance through the use of oil pressure and spring force, are used.


d.

The camshaft (intake) and No. 2 camshaft (exhaust) are driven by a chain sub-assembly.


e.

This engine has the Variable Valve Timing-intelligent (VVT-i) system which controls the intake camshaft to provide optimal valve timing according to driving conditions. With the use of this system, lower fuel consumption, higher engine performance, and fewer exhaust emissions have been achieved.

W105436
1.417,1.354 1.417,0.5 1.417,0.5 1.521,0.5 true 1.802,1.323 1.802,0.333 1.802,0.333 1.927,0.333 true 2.698,1.198 2.698,0.375 2.698,0.375 2.813,0.375 true 4.188,1.104 4.188,0.365 4.188,0.365 4.292,0.365 true 5.458,0.927 5.458,0.375 5.458,0.375 5.594,0.375 true 5.656,1.656 6.427,1.656 true 5.104,3.333 6.344,3.333 true 3.781,2.031 4.104,2.031 true 3.417,2.021 3.146,2.021 true 2.042,1.885 2.573,1.885 true 1.948,2.75 2.563,2.75 true 1.646,2.615 0.625,2.615 true 1.354,3.115 0.646,3.115 true 1.833,3.885 1.833,4.385 true 1.563,0.417 1.719,0.688 0.156,0.271 10 false *1 1.969,0.25 2.125,0.521 0.156,0.271 10 false *2 2.865,0.271 3.021,0.542 0.156,0.271 10 false *3 4.333,0.281 4.49,0.552 0.156,0.271 10 false *4 5.656,0.281 5.813,0.552 0.156,0.271 10 false *5 0.479,2.5 0.635,2.667 0.156,0.167 10 false *6 0.49,3.01 0.646,3.188 0.156,0.177 10 false *7 2.604,1.781 2.76,2.052 0.156,0.271 10 false *8 2.583,2.688 2.74,2.854 0.156,0.167 10 false *9 2.917,1.896 3.156,2.167 0.24,0.271 10 false *10 4.135,1.927 4.375,2.198 0.24,0.271 10 false *11 6.438,1.542 6.688,1.813 0.25,0.271 10 false *12 6.375,3.229 6.625,3.5 0.25,0.271 10 false *13 1.708,4.396 1.958,4.573 0.25,0.177 10 false *14
*1 Camshaft Timing Gear Assembly *2 No. 2 Chain Vibration Damper
*3 Camshaft (Intake) *4 No. 2 Camshaft (Exhaust)
*5 No. 1 Valve Rocker Arm Sub-assembly *6 Chain Tensioner Slipper
*7 No. 1 Chain Tensioner Assembly *8 Camshaft Timing Sprocket
*9 No. 1 Chain Vibration Damper *10 Intake Valve
*11 Exhaust Valve *12 Valve Lash Adjuster Assembly
*13 Valve *14 Chain Sub-assembly


Valve Timing
Intake camshaft Open -23° to 22° BTDC
Close 103° to 58° ABDC
Exhaust camshaft Open 35° BBDC
Close 9° ATDC

W105437
1.198,0.51 1.75,0.51 1.75,0.51 2.198,1.177 true 0.479,2.604 1.146,2.604 true 2.24,0.542 2.427,0.708 0.188,0.167 10 false *b 1.021,0.406 1.198,0.594 0.177,0.188 10 false *a 1.698,0.938 1.969,1.125 0.271,0.188 10 false 22° 2.771,0.927 3.042,1.115 0.271,0.188 10 false 23° 1.021,3.094 1.292,3.281 0.271,0.188 10 false 58° 2.521,0.813 2.688,1 0.167,0.188 10 false 9° 3.01,3.448 3.281,3.635 0.271,0.188 10 false 35° 0.677,1.938 1.219,2.125 0.542,0.188 10 false 103° 4.604,1.49 4.938,1.646 0.333,0.156 10 false *d 2.26,3.854 2.594,4.01 0.333,0.156 10 false *c 0.313,2.49 0.49,2.677 0.177,0.188 10 false *a 4.594,2.188 4.927,2.344 0.333,0.156 10 false *e
*a VVT-i Operation Range (Intake) *b TDC
*c BDC *d Intake Valve Opening Angle
*e Exhaust Valve Opening Angle - -