CONSTRUCTION
The camshafts are made of cast iron alloy.
Oil passages are provided on the camshaft (intake) in order to supply engine oil to the VVT-i system.
A camshaft timing gear assembly is installed on the front of the camshaft (intake) to vary the timing of the intake valves.
Together with the use of the No. 1 valve rocker arm sub-assemblies, the cam profile is modified. This results in increased valve lift when the valve begins to open and as it finishes closing, helping to achieve enhanced output performance.
| *1 | Camshaft Timing Gear Assembly | *2 | Camshaft (Intake) |
| *3 | No. 2 Camshaft (Exhaust) | *4 | Modified Portion of Cam Profile |