OPERATION
Motive Force Transmission Path
The motive force created by the engine and MG2 is transmitted by the counter drive gear of the compound gear unit, the counter driven gear, the final drive gear, and then the differential gear unit, in order to drive the front wheels.
| *1 | Engine | *2 | Transmission Input Damper Assembly |
| *3 | MG1 | *4 | Compound Gear Unit |
| *5 | Sun Gear | *6 | MG2 |
| *7 | Oil Pump | *8 | Ring Gear |
| *9 | Carrier | *10 | Counter Drive Gear (Compound Gear) |
| *11 | Final Drive Gear | *12 | Counter Driven Gear |
| *13 | Final Driven Gear | *14 | Differential Gear Unit |
Engine Motive Force and MG2 Motive Force Transmission Path
The engine motive force, which is input by the carrier, is transmitted to the ring gear. The motive force of MG2 is transmitted to the ring gear via the motor speed reduction planetary gear unit. The sum of these two motive forces is transmitted by the compound gear in order to drive the wheels.
| *1 | MG1 | *2 | MG2 |
| *3 | Power Split Planetary Gear Unit | *4 | Motor Speed Reduction Planetary Gear Unit |
|
Rotation Direction |
|
From Engine |
|
From MG2 |
|
To Wheels |
MG2 Motive Force Transmission Path
The motive force of MG2 is transmitted via the sun gear and is output to the ring gear in order to drive the wheels. The carrier of the motor speed reduction planetary gear unit is fixed. As a result, the motor speed reduction planetary gear unit reduces the speed of MG2, increasing torque in accordance with a set gear ratio. The direction of rotation of MG2 changes according to whether the vehicle is travelling forward or in reverse.
| *1 | MG1 | *2 | MG2 |
| *3 | Power Split Planetary Gear Unit | *4 | Motor Speed Reduction Planetary Gear Unit |
|
Rotation Direction |
|
From MG2 |
|
To Wheel | - | - |
| *1 | MG1 | *2 | MG2 |
| *3 | Power Split Planetary Gear Unit | *4 | Motor Speed Reduction Planetary Gear Unit |
|
Rotation Direction |
|
From MG2 |
|
To Wheel | - | - |
Engine Motive Force Transmission Path
The engine motive force, which is input by the carrier, is transmitted to the sun gear. Thus, motive force is transmitted in order to operate MG1 as a generator.
| *1 | MG1 | *2 | MG2 |
| *3 | Power Split Planetary Gear Unit | *4 | Motor Speed Reduction Planetary Gear Unit |
|
Rotation Direction |
|
From Engine |
|
To MG1 | - | - |
MG1 Motive Force Transmission Path
The motive force of MG1 is transmitted via the sun gear and is output to the carrier. Thus, motive force is transmitted in order to start the engine.
| *1 | MG1 | *2 | MG2 |
| *3 | Power Split Planetary Gear Unit | *4 | Motor Speed Reduction Planetary Gear Unit |
|
Rotation Direction |
|
From MG1 |
|
To Engine | - | - |