CONSTRUCTION
This sling type lubrication mechanism uses the oil catch tanks and final driven gear, which sling the lubricant into the oil catch tanks. This construction minimizes the drive torque of the oil pump, which reduces the drive loss.
The oil catch tanks are used in order to supply oil in a stable manner. The oil catch tanks temporarily store the oil that is slung up, and supply oil to the gears from there. Furthermore, oil holes are provided in the oil catch tanks in order to efficiently supply oil to MG1 and MG2.
| *1 | Input Shaft | *2 | Oil Hole |
| *3 | Oil Catch Tank | *4 | Second Shaft |
| *5 | Third Shaft | *6 | Final Driven Gear |
| *7 | Counter Driven Gear | *8 | Counter Drive Gear |
|
Oil Flow |
|
Final Gear Rotation Direction |