CONSTRUCTION
An L-shaped front lower No. 1 suspension arm sub-assembly, of which the cross section structure is closed, has been provided. As a result, in addition to the material thickness having been made thinner, the cross section and arm shape have been optimized, thus achieving both a light weight and high rigidity at the same time.
The spring rate of the lower No. 1 arm bush has been increased to ensure the proper support rigidity of the front lower No. 1 suspension arm. As a result, excellent steering feel and stability have been achieved.
The front lower No. 2 arm bush is a vertical axis type. It is a perpendicular bulge type bushing that gives a soft ride.
| *1 | Front Lower No. 1 Suspension Arm Sub-assembly | *2 | Front Lower No. 1 Arm Bush (Cross Section) |
| *3 | Front Lower No. 2 Arm Bush (Cross Section) | - | - |
| *a | A-A Cross Section | - | - |
|
Front | - | - |