Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE CONTROL SYSTEM
NM2040EQ _54 Brake _014497 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0073595 BRAKE CONTROL SYSTEM CO CONTROL F

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE CONTROL SYSTEM  CONTROL  BRAKE ASSIST  


SYSTEM CONTROL


a.

In the brake assist, based on the signals from the master cylinder pressure sensor, the skid control ECU calculates the speed and the amount of the brake pedal application and then determines the intention of the driver to make an emergency braking. If the skid control ECU determines that the driver intends the emergency braking, this function activates the brake actuator to increase the brake fluid pressure, which increases the brake force.

X100968
2.896,0.083 4.063,0.51 1.167,0.427 10 false Skid Control ECU 2.667,0.615 3.688,1.146 1.021,0.531 10 false Master Cylinder Pressure Signal 0.354,1.729 1.698,2.313 1.344,0.583 10 false The fluid pressure is increased by the skid control ECU 4.5,0.615 6.208,1.188 1.708,0.573 10 false Brake Pedal Stroke Sensor Assembly Signal 1.323,3.448 2.115,3.729 0.792,0.281 10 false Brake Force 4.396,4.219 5.729,4.5 1.333,0.281 10 false With Brake Assist 4.375,4.865 5.76,5.146 1.385,0.281 10 false Without Brake Assist 4.656,5.396 5.125,5.729 0.469,0.333 10 false Time 0.542,0.625 2.427,1.115 1.885,0.49 10 false Fluid Pressure Control Signal