CONSTRUCTION
The hydraulic brake booster consists of the operating rod which is directly connected to the brake pedal, power piston, master cylinder piston, regulator piston and the spool valve to switch the brake fluid passage.
The operating rod is directly connected to the power piston, by which the operating force of the brake pedal is transmitted.
The regulator piston is directly connected to the spool valve through which the master cylinder pressure is applied to the regulator piston in the advance direction (left direction in the illustration) and the pressure boosted by the brake booster is applied to the piston in the retard direction (right direction in the illustration), thus balancing the pressures in both directions. In addition, a return spring is placed in the regulator piston to ensure the return force of the spool valve when no pressure is applied.
| *1 | Brake Actuator | *2 | Hydraulic Brake Booster |
| *3 | Stroke Simulator | *4 | Spool Valve |
| *5 | Regulator Piston | *6 | Master Cylinder Piston |
| *7 | Power Piston | *8 | Operating Rod |
| *9 | Return Spring | - | - |
| *a | Hydraulic Brake Booster Cross Section | - | - |
| *1 | Regulator Piston | *2 | Master Cylinder Piston |
| *3 | Power Piston | *4 | Operating Rod |
| *5 | Spool Valve | *6 | Regulator Chamber |
| *7 | Master Cylinder Chamber | *8 | Booster Chamber |
| *a | Simplified Diagram | *b | To Reservoir Tank |
| *c | From Accumulator | *d | To Front Brake |
| *e | To Rear Brake | - | - |
OPERATION
When the brake pedal is depressed by the driver, the operating force of the brake pedal is transmitted from the operating rod via the power piston to the master cylinder piston. The return spring of the master cylinder chamber has a higher setting load than that of the regulator piston, thus allowing the regulator piston to move forward before the master cylinder chamber is compressed.
The spool valve closes the oil passage to the reservoir tank and the booster chamber and opens the one from the accumulator and the booster chamber, and this allows the fluid pressure to be applied to the booster chamber, generating a boosted force and further boosting the brake pedal force. When the fluid pressure is applied to the booster chamber, the boosted force overcomes the return spring force, compressing the master cylinder and increasing the fluid pressure. In addition, the fluid pressure in the booster chamber increases the fluid pressure in the rear brake oil passage.
| *1 | Regulator Piston | *2 | Return Spring |
| *3 | Master Cylinder Piston | *4 | Booster Chamber |
| *5 | Operating Rod | *6 | Spool Valve |
| *7 | Power Piston | - | - |
| *a | From Accumulator | *b | To Front Brake |
| *c | To Rear Brake | - | - |
When the driver's pedal operation is stopped and the pedal operating force and the master cylinder pressure are balanced, the forces are respectively applied to the front and rear of the regulator piston, in other words, the forces respectively generated by the master cylinder pressure and the regulator pressure are balanced, therefore, the spool valve closes the passage between the booster chamber and the accumulator, and also to the reservoir tank.
| *1 | Spool Valve | *2 | Regulator Piston |
| *a | Regulator Pressure | *b | Master Cylinder Pressure |
When the driver's pedal operating force is reduced, the master cylinder pressure drops, therefore, the force applied to the regulator piston return side becomes larger relatively and the regulator piston and the spool valve move further rearward, and this opens the fluid passage between the reservoir tank and the booster chamber.
As a result, the brake fluid in the hydraulic brake booster is returned to the reservoir tank, decreasing the booster chamber pressure and balancing the booster chamber pressure against the reduced master cylinder pressure. This repetitive operation decreases the booster chamber pressure and the master cylinder pressure in accordance with the pedal operating force.
| *1 | Spool Valve | *2 | Regulator Piston |
| *3 | Booster Chamber | - | - |
| *a | To Reservoir Tank | *b | From Front Brake |
| *c | From Rear Brake | - | - |