FUNCTION OF MAIN COMPONENTS
The main components of the EPS system are as follows:
| Component | Function | ||
|---|---|---|---|
| Steering Column Assembly | Power Steering ECU Assembly | Actuates the power steering motor assembly mounted on the steering column assembly to provide power assist, based on the signals received from various sensors and ECUs. | |
| Power Steering Motor Assembly | Generates assist torque in accordance with a signal received from the power steering ECU assembly. | ||
| Rotation Angle Sensor (Built in Power Steering Motor Assembly) | Outputs the rotation angle of the power steering motor assembly to the power steering ECU assembly. | ||
| Electric Power Steering Column Sub-assembly | Torque Sensor | Detects the amount of twist of the torsion bar. Based on the torque that is applied to the torsion bar, the sensor creates an electrical signal, and outputs this signal to the power steering ECU assembly. | |
| Reduction Mechanism | Reduces the speed of the power steering motor assembly through the use of a worm gear and a wheel gear and transmits it to the column shaft. | ||
| Skid Control ECU | ·
Outputs the vehicle speed signal to the power steering ECU assembly. ·
Requests steering torque assist during steering cooperative control. |
||
| Air Conditioning Amplifier Assembly | Receives a signal from the power steering ECU assembly to limit electrical use. | ||
| Combination Meter Assembly | EPS Warning Light | ·
Illuminates to alert the driver when the power steering ECU assembly detects a malfunction in the EPS system. ·
If the power steering ECU assembly detects low auxiliary battery voltage, it will illuminate the EPS warning light. |
|
| Buzzer | Sounds to warn the driver of a malfunction in the system. | ||
SYSTEM CONTROL
The EPS system has the following controls:
| Control | Outline | |
|---|---|---|
| Basic Control | Calculates the assist current from the steering torque value and the vehicle speed, and actuates the power steering motor assembly. | |
| Inertia Compensation Control | Ensures the starting movement of the power steering motor assembly when the driver starts to turn the steering wheel. | |
| Recovery Control | During the short interval between the time the driver fully turns the steering wheel and when the wheels try to recover, this control assists the recovery force. | |
| Damper Control | Regulates the amount of assist when the driver turns the steering wheel while driving at high speeds, thus damping the changes in the yaw rate of the vehicle body. | |
| System Overheat Protection Control | Estimates the power steering motor assembly temperature based on the amperage and the length of time the amperage has been applied for. If the temperature exceeds the standard, it limits the amperage to prevent the power steering motor assembly from overheating. | |
| Electric Load Control | Prevents a reduction of assist torque if the auxiliary battery voltage decreases. | |
| Cooperative Control | Brake Control System | The power steering ECU assembly performs cooperative control with the skid control ECU in order to control the steering assist torque in accordance with information received from the skid control ECU. This facilitates the steering operation of the driver, thus realizing a high level of vehicle stability.
For details, see page ( ).
|
Electric Load Control
When the power steering ECU assembly detects an auxiliary battery voltage decrease, it transmits the electric load control signal to the air conditioning amplifier assembly in order to limit the electrical usage.
The air conditioning amplifier assembly limits operation of the rear window defogger until the power steering ECU assembly releases the limitation demand.
FAIL-SAFE
If the power steering ECU assembly detects a malfunction in the EPS system, the power steering ECU assembly illuminates the EPS warning light and sounds the buzzer in the combination meter assembly to inform the driver.
If a system malfunction is detected, the power steering ECU assembly changes control mode to fail-safe mode. For details, refer to the Repair Manual.
DIAGNOSIS
The power steering ECU assembly will also store Diagnostic Trouble Codes (DTCs). The DTCs can be accessed through the use of an intelligent tester. For details, refer to the Repair Manual.