SYSTEM CONTROL
Power Electrical Remote Control Function
This function operates when all of the following conditions are met:
The power switch is on (ACC) or on (IG).
When the R or L position of the mirror select switch has been selected.
The user operates an outer mirror switch assembly to control the electric remote mirrors.
Reverse-linked Function (Models with Memory Function)
This function operates when all of the following conditions are met:
The power switch is on (IG).
When the R or L position of the mirror select switch has been selected.
The shift lever is moved to R.
Memory System (Mirror Surface Position Memory Function) (Models with Memory Function)
This function operates when any of the following conditions are met:
When the memory switch is operated with the power switch on (IG), the shift lever in P and the mirror position stored in the memory system.
When the memory switch is operated within approximately 60 seconds after closing the driver side door with the power switch off and the mirror position stored in the memory system.
When the memory switch is operated within approximately 180 seconds after opening the driver side door with the power switch off and the mirror position stored in the memory system.
With the power switch off, the driver door closed and the key ID registration of the memory call function complete, the doors are unlocked using the smart entry and start system function or wireless door unlock function and then the driver door is opened.
FUNCTION
The outside rear view mirrors have the following functions:
| Function | Function | |
|---|---|---|
|
*: Models with memory function |
||
| Electric Remote Mirrors | Remote Control Function | The adjustment axis of the mirror surface of the electric remote mirrors can be controlled by using the outer mirror switch assembly. |
| Reverse-linked Function* | This function tilts the mirror surface downward to improve visibility when reversing. | |
| Memory System* | The memory system can store the driver seat, outside rear view mirror and tilt and telescopic steering positions. Up to 2 memory positions can be stored in the system memory and recalled. | |