Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM
NM2040EQ _59 Vehicle Exterior _014520 LIGHTING (EXT) _0073628 LIGHTING SYSTEM CO CONTROL F

LIGHTING (EXT)  LIGHTING SYSTEM  CONTROL  AUTOMATIC LIGHT CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function
Main Body ECU (Multiplex Network Body ECU) Receives various signals and illuminates the headlights, taillights, clearance lights and license plate lights.
Engine Room Junction Block Assembly Supplies power to the high beams.
Headlight Dimmer Relay The headlight dimmer relay supplies power to the low beams.
Instrument Panel Junction Block Assembly
·

Taillight Relay


The taillight relay supplies power to the taillights, clearance lights and license plate lights.
Certification ECU (Smart Key ECU Assembly) Receives the power switch signal and transmits it to the instrument panel junction block assembly.
Automatic Light Control Sensor Detects the ambient light level.
Headlight Dimmer Switch Assembly Light Control Switch Outputs a light control signal and transmits it to the main body ECU (multiplex network body ECU).
Combination Meter Assembly Taillight Indicator Light Lights up to inform the driver when the taillights turn on.


DIAGNOSIS


a.

When the main body ECU (multiplex network body ECU) detects a malfunction in the automatic light control system, Diagnostic Trouble Codes (DTCs) are stored in memory.


b.

The DTCs can be read using the intelligent tester. For details, refer to the Repair Manual.