FUNCTION
Impact Absorbing Structure for Frontal Collision
Through the adoption of a body structure that disperses collision energy to multiple frame components, collision energy is efficiently absorbed to suppress cabin deformation.
The front side members utilize to absorb and disperse energy in a frontal collision.
Door beltline reinforcements are strengthened to optimize dispersal of collision energy to the rocker panel and floor panel.
| *1 | Front Side Member | *2 | Beltline Reinforcement |
|
Impact |
|
Impact Flow |
Impact Absorbing Structure for Side Collision
Through the adoption of a body structure that disperses collision energy to multiple frame components, collision energy is efficiently absorbed to suppress cabin deformation.
The center pillars are strengthened to optimize dispersal of collision energy to the rocker panel and roof reinforcement.
The use of roof reinforcement and floor crossmember enables a construction that transmits load to the opposite side of the vehicle in a collision.
A rear door box is provided inside the bottom of the rear door. In the event of a side collision, the rear door box strikes the rear crossmember gusset, absorbing the impact by transmitting it to the center floor member.
| *1 | Center Pillar Outer Reinforcement | *2 | Front Floor Crossmember |
| *3 | Center Floor Crossmember | *4 | Roof Reinforcement |
| *5 | Rocker Panel Reinforcement | *6 | Impact Protect Beam |
| *7 | Impact Support Box | *8 | Seat Pipe |
| *9 | Rear Door Box | *10 | Rear Crossmember Gusset |
|
Impact |
|
Impact Flow |
Impact Absorbing Structure for Rear Collision
Straight rear side members are used to reduce body deformation in a rear collision.
Lessening Pedestrian Injury
A hood reinforcement is provided for the hood inner panel to help secure excellent pedestrian protection performance and tensile rigidity.
| *1 | Longitudinal Ribbed Structure | *2 | Dent Reinforcement (Impact Absorbing Structure) |
An impact absorbing bracket is used for the mounting portion of the front fender panel to absorb impact energy to the head of the pedestrian in a collision, thus dampening the impact to the head.
| *1 | Impact Absorbing Bracket (Front) | *2 | Impact Absorbing Bracket (Rear) |
| *a | A-A Cross Section | *b | B-B Cross Section |
| *c | Before Collision | *d | After Collision |
|
Impact | - | - |
The cowl uses an open section structure that collapses easily in an impact from the top, thus reducing the impact to and head injuries sustained by a pedestrian in an accident.
| *1 | Windshield Glass | *2 | Cowl Top Panel Sub-assembly |
| *a | A-A Cross Section | *b | Before Collision |
| *c | After Collision | - | - |
|
Impact | - | - |