FUNCTION OF MAIN COMPONENTS
The main components in the cruise control system have the following functions.
| Component | Function | ||
|---|---|---|---|
| Cruise Control Switch | ON-OFF Button | Turns the cruise control system on and off. | |
| CANCEL Switch | A cancel signal is output to the power management control ECU when this switch is operated. | ||
| +RES Switch | The accelerate function and resuming of a preset speed can be performed by operating this switch. A signal is output to the power management control ECU when this switch is operated. | ||
| -SET Switch | The decelerate function and vehicle speed setting signals are output to the power management control ECU when this switch is operated. | ||
| Power Management Control ECU | ·
Controls all functions of the cruise control system in accordance with the signals from switches, sensors and ECUs. ·
If the power management control ECU detects a malfunction in the cruise control system, it will store Diagnostic Trouble Codes (DTCs). |
||
| Inverter with Converter Assembly | MG ECU | Built into the inverter with converter assembly. Controls the motive force of MG2 in accordance with signals from the power management control ECU. | |
| ECM | Actuates the throttle control motor in accordance with the signals from the power management control ECU. | ||
| Brake Booster with Master Cylinder Assembly | Skid Control ECU | Transmits the VSC operation signal to the power management control ECU. | |
| Combination Meter Assembly | Multi-information Display | Cruise Control Indicator | ·
Based on a cruise control indicator operation signal sent by the power management control ECU, the combination meter assembly illuminates the cruise control indicator when the cruise control system has been turned on using the ON-OFF button on the cruise control switch. ·
Based on a cruise control indicator operation signal sent by the power management control ECU, the combination meter assembly turns off the cruise control indicator if a malfunction occurs in the cruise control system. |
| Cruise Control SET Indicator | Illuminates while the cruise control system is controlling vehicle speed. | ||
| Multi-information Display | Displays a warning message to alert the driver in accordance with a signal provided by the power management control ECU. | ||
| Master Warning Light | Illuminates when there is a malfunction in the system. | ||
| Hybrid Vehicle Transaxle Assembly | MG2 | Generates motive force for the wheels. | |
| Throttle Body with Motor Assembly | Throttle Control Motor | Adjusts the throttle valve opening angle in accordance with signals from the ECM. | |
| Throttle Position Sensor | Detects the throttle valve opening angle and outputs it to the ECM. | ||
| Speed Sensor | Detects the wheel speed of each of the 4 wheels. | ||
| Accelerator Pedal Sensor Assembly | Detects the accelerator pedal depression angle and transmits it to the power management control ECU. | ||
| Shift Lever Position Sensor | Detects the shift lever position and transmits signals to the power management control ECU. | ||
| Stop Light Switch Assembly | Detects the brake pedal being depressed and transmits its signal to the power management control ECU. | ||
| VSC OFF Switch | Detects the VSC OFF (TRC OFF) signal and outputs it to the skid control ECU. | ||
FUNCTION
The cruise control system has the following control functions.
| Function | Outline |
|---|---|
| Constant Speed Control | The power management control ECU compares the actual vehicle speed with the set speed. If the vehicle speed is higher than the set speed, the power management control ECU calculates optimal motive forces for the engine and MG2, and decelerates by adjusting the respective motive forces. If the vehicle speed is lower than the set speed, the power management control ECU calculates optimal motive forces for the engine and MG2, and accelerates by adjusting the respective motive forces. |
| Set Control | When this system fulfils the following conditions, and the cruise control switch is moved to the -SET side and released, the power management control ECU stores the vehicle speed and maintains the vehicle constantly at that speed.
·
The cruise control system has been turned on using the ON-OFF button on the cruise control switch. ·
The vehicle is driving at a speed of approximately 40 km/h (25 mph) or more. |
| Low Speed Limit Control | The low speed limit is the lowest speed that cruise control can be set at and it is designed to be approximately 40 km/h (25 mph). The cruise control system cannot be set below that speed. If the vehicle speed drops below that speed while the cruise control is operating, speed control by the cruise control system will be canceled automatically. However, the set speed is kept in memory. |
| COAST Switch Control | When the cruise control switch is held to the -SET side, the vehicle speed and the set vehicle speed change as follows:
·
The vehicle will decelerate. ·
The set vehicle speed will change to the speed at which the vehicle is being driven when the COAST switch (-SET side operation) is released. |
| Tap Down Control | When the cruise control switch is moved momentarily (approximately 0.6 seconds or less) to the -SET side, the vehicle speed and the set vehicle speed change as follows:
·
The vehicle will decelerate in increments of approximately 1 km/h (0.6 mph) each time the switch is moved. ·
However, if the difference between the actual vehicle speed and the set vehicle speed is greater than 5 km/h (3 mph), the set vehicle speed will change to the speed at which the vehicle is being driven when the switch is pushed. |
| ACC Switch Control | When the cruise control switch is held to the +RES side, the vehicle speed and the set vehicle speed change as follows:
·
The vehicle will accelerate. ·
The set vehicle speed will change to the speed at which the vehicle is being driven when the switch is released. |
| Tap Up Control | When the cruise control switch is moved momentarily (approximately 0.6 seconds or less) to the +RES side, the vehicle speed and the set vehicle speed change as follows:
·
The vehicle will accelerate in increments of approximately 1 km/h (0.6 mph) each time the switch is moved. ·
However, if the difference between the actual vehicle speed and the set vehicle speed is greater than 5 km/h (3 mph), the set vehicle speed will not change. |
| RES Switch Control | If the vehicle speed is above the low speed limit, the cruise control resumes operation (when the cruise control switch is subsequently pushed to the +RES side) to reach the vehicle speed that was set at the time the driver canceled cruise control. |
| Manual Cancel Control | If any of the following signals are sent to the power management control ECU, cruise control speed control by the cruise control system is canceled accordingly.
·
Stop light switch on signal (The brake pedal is depressed.) ·
Signals indicating that the shift lever has been moved from D to any other position. (The shift lever is moved from D to N or B.) ·
CANCEL switch on signal (The cruise control switch is moved to the CANCEL side.) ·
Cruise control switch (ON-OFF button) off signal |
| Automatic Cancel Control | If the following condition occurs while the cruise control system is controlling vehicle speed, the speed that is stored in memory is cleared and speed control by the cruise control system is canceled.
·
Stop light switch open or short circuit Furthermore, the master warning light illuminates, the cruise control indicator turns off, and a message indicating a malfunction will be displayed on the multi-information display until the cruise control system is turned off using the cruise control switch. speed control by the cruise control system is disabled until the cruise control system is turned on again using the ON-OFF button. |
| If the following condition occurs while the cruise control system is controlling vehicle speed, the speed that is stored in memory is cleared and speed control by the cruise control system is canceled.
·
Malfunction in the hybrid system Furthermore, cruise control operation is disabled until the cruise control system is turned on again using the ON-OFF button. |
|
| If any of the following conditions occur while the cruise control system is controlling vehicle speed, the speed that is stored in memory is cleared and speed control by the cruise control system is canceled.
·
Stop light switch input signal is abnormal ·
Cancel circuit malfunction ·
Communication malfunction between the skid control ECU and power management control ECU ·
Brake control system malfunction Furthermore, the master warning light illuminates, the cruise control indicator turns off, and a message indicating a malfunction will be displayed on the multi-information display until the cruise control system is turned off using the cruise control switch. Speed control by the cruise control system is disabled until the power switch is turned off. |
|
| If the following condition occurs while the cruise control system is controlling vehicle speed, the speed that is stored in memory is cleared and speed control by the cruise control system is canceled.
·
Vehicle speed decreases by 16 km/h (10 mph) or more below the speed at which the cruise control is set. |
|
| If the following condition occurs while the cruise control system is controlling vehicle speed, speed control by the cruise control system is canceled.
·
Vehicle speed decreases below the low speed limit (approximately 40 km/h [25 mph]). |
|
| Other Cancelation Conditions | ·
TRC operates for a certain period of time during cruise control driving. ·
VSC operation. ·
VSC OFF (TRC OFF) switch on signal. |
DIAGNOSIS
If a malfunction occurs in the cruise control system during cruise control operation, the power management control ECU cancels cruise control operation, illuminates the master warning light and turns off the cruise control indicator and cruise control SET indicator. At this time, "Check Cruise Control System" is displayed on the multi-information display. The power management control ECU stores the malfunction in the form of a 5-digit Diagnostic Trouble Code (DTC).
The 5-digit DTC can be read by connecting the Global TechStream (GTS) to the DLC3. For details, refer to the Repair Manual.