Home › Engine / Hybrid System › CRUISE CONTROL › DYNAMIC RADAR CRUISE CONTROL SYSTEM › from 2015.04
NM2040EQ _51 Engine / Hybrid System _014490 CRUISE CONTROL _0166669 DYNAMIC RADAR CRUISE CONTROL SYSTEM DE DETAILS F

CRUISE CONTROL  DYNAMIC RADAR CRUISE CONTROL SYSTEM  DETAILS  COMBINATION METER  


OPERATION


a.

The combination meter assembly has a cruise control indicator (constant speed control mode), cruise control indicator (vehicle-to-vehicle distance control mode), cruise control SET indicator, buzzer, and multi-information display to provide warnings and messages regarding the dynamic radar cruise control system.


b.

The multi-information display displays the set vehicle speed, vehicle ahead mark, and warning message.


c.

Examples are shown below for the illumination or display of each indicator or multi-information display.

Constant Speed Control Mode
Condition Multi-information Display*1 Buzzer

*1: These illustrations are examples.

*2: While driving at a set speed of 100 km/h (62 mph).

Being Controlled*2
Y176053

-
System Check
Y176054

Buzzer in the combination meter assembly sounds once

Vehicle-to-vehicle Distance Control Mode
Condition Multi-information Display*1 Buzzer

*1: These illustrations are examples.

*2: While driving at a set speed of 100 km/h (62 mph).

Set Standby
Y176055

-
Under Constant Speed Control (No Vehicle Ahead, Long)*2
Y176056

-
Under Follow-up Control (Vehicle Ahead, Middle)*2
Y176057

-
Deceleration Control/Vehicle Approach Warning (Vehicle Ahead, Long)*2
Y176058

Skid control buzzer sounds continuously
Blinks
Millimeter Wave Radar Sensor Assembly is Dirty.
Y176059

Buzzer in the combination meter assembly sounds once
Poor Weather Conditions
Y176060

Buzzer in the combination meter assembly sounds once
System Check
Y176054

Buzzer in the combination meter assembly sounds once
Beam Axis Adjustment
Y176072

Skid control buzzer sounds once