CONSTRUCTION
In the front shock absorber assembly, a low-pressure N2 gas sealed type construction is used to suppress cavitations and a multi-leaf type linear control valve is also used to attain the linear damping force characteristics, offering both driving stability and ride comfort.
To prevent hazardous conditions, make sure to empty the gas from the shock absorber before discarding an N2 gas sealed shock absorber. For details, refer to the Repair Manual.
Since the multi-leaf type linear control valve has a laminate-structure backing valve, it enables the damping force to be generated at lower piston speeds, compared with a structure that generates the damping force with only the base valve when compression force is applied.
| *1 | Low-pressure N2 Gas | *2 | Base Valve |
| *3 | Multi-leaf Type Linear Control Valve | *4 | Backing Valve |
| *5 | Inner Valve | - | - |
|
Oil Flow |
|
Compression Force |
The illustration below shows a comparison of multi-leaf type linear control valve and conventional valve damping force characteristics.