OUTLINE
An optitron type combination meter assembly, which has a color type multi-information display, is provided.
The combination meter assembly has a built-in meter ECU and buzzer.
| *a | Rheostat Switch | *b | Multi-information Display |
| *c | ODO/TRIP Switch | *d | The illustration shown is an example only. |
MAIN FEATURES
Opening/Ending Ceremony
An opening/ending ceremony which allows for anticipation of a pleasant drive is used. The ceremony operates as follows:
When the power switch is turned on (IG), the needles, gauges and panels of the speedometer, hybrid system indicator, engine coolant temperature gauge and fuel gauge and the multi-information display illuminate.
When the power switch is turned off, all the illuminations fade out. During this period, the multi-information display shows the Eco Drive Level for 3 seconds.
| *a | IG ON | *b | IG OFF |
| *c | The illustrations shown are examples only. | - | - |
Hybrid System Indicator
The Hybrid System Indicator displays the total of the HV battery and engine output as the hybrid system output.
The scale for the hybrid system indicator is divided into 3 areas (Charge, Eco, Power). The role of each area is as follows.
| Area | Function |
|---|---|
| Charge | The Charge area indicates when energy is being regenerated. |
| Eco | ·
The Eco area indicates when the vehicle is being driven in an eco-friendly manner. ·
The Hybrid Eco area indicates that the vehicle is driven in a manner that promotes frequent motor only operation. (Based on various conditions, the power management ECU controls if the engine should be stopped to enhance fuel efficiency.) |
| Power | The Power area indicates that the eco-friendly driving range is being exceeded (during full power driving, etc.). |
| *a | Charge Area | *b | Hybrid Eco Area |
| *c | Eco Area | *d | Power Area |
Multi-information Display
The multi-information display is located at the center of the combination meter assembly.
The multi-information display shows the following information.
| Item | Outline |
|---|---|
|
*1: Models with dynamic radar cruise control system *2: Models with lane departure alert system *3: Models with navigation system |
|
| Shift Position Indicator | The current shift position is displayed. |
| Outside Temperature | ·
The outside temperature is displayed. ·
When the outside temperature drops below 3°C (37°F), an ice warning light illuminates to warn the driver to drive with caution due to possibly icy road conditions. After the ice warning light flashes 10 times, the light stays on. When the temperature reaches 5°C (41°F), the light goes off. |
| Indicator | When the display conditions are met, the following indicators illuminate.
·
Cruise Control Indicator ·
Cruise Control Indicator (Vehicle-to-Vehicle Distance Control Mode)*1 ·
Cruise SET Indicator ·
Lane Departure Alert Indicator*2 ·
EV Mode Indicator ·
ECO Mode Indicator |
| Information | The following information can be displayed on the multi-information display by switching the tabs.
·
Drive Information ·
Navigation Information*3 ·
Cruise Control System/Dynamic Radar Cruise Control System*1 Information ·
Warning Message ·
Settings
|
| Vehicle Power Source State | The vehicle power source state is displayed. |
| ODO/TRIP Meter | ·
The odometer, trip meter A or trip meter B are displayed. ·
The item shown can be switched by pressing the ODO/TRIP switch. |
| Warning Message | A warning display will interrupt the current display on the multi-information display immediately when a warning is necessary. |
| Light Control Rheostat | Meter panel luminance can be changed by using the rheostat switch. |
The drive information shows the following information.
| Item | Outline |
|---|---|
| Drive Information | ·
The items selected on the setting screen can be displayed. 2 items can be selected in drive information 3 among the following: ·
Total Average Vehicle Speed between Reset Operations ·
Average Vehicle Speed after Engine Start-up ·
Total Elapsed Time between Reset Operations ·
Elapsed Time after Engine Start-up ·
Cruising Range ·
Cruising Range after Engine Start-up ·
Total Cruising Range between Reset Operations ·
Blank ·
In addition to the above functions, the following items can be displayed. ·
Drive Information 1 (Current Fuel Consumption and Total Average Fuel Consumption between Reset Operations) ·
Drive Information 2 (Eco Drive Level) ·
Energy Monitor ·
Blank
|
When navigation information is being displayed, current navigation information (turn-by-turn, straight guidance or direction meter) can be displayed. (Models with navigation system)