Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM › from 2015.04
NM2040EQ _59 Vehicle Exterior _014520 LIGHTING (EXT) _0073628 LIGHTING SYSTEM CO CONTROL F

LIGHTING (EXT)  LIGHTING SYSTEM  CONTROL  DAYTIME RUNNING LIGHT  


FUNCTION OF MAIN COMPONENTS


Component Function
Main Body ECU (Multiplex Network Body ECU) Receives various signals and illuminates the daytime running lights.
Engine Room Junction Block Assembly Supplies power to the daytime running lights.
Headlight Dimmer Switch Assembly Outputs a light control switch position signal to the main body ECU (multiplex network body ECU).
Instrument Panel Junction Block Assembly Receives the ignition signal and transmits it to the main body ECU (multiplex network body ECU).
Parking Brake Switch Assembly Outputs a parking brake operation signal to the main body ECU (multiplex network body ECU).


SYSTEM CONTROL


a.

Operating Condition

i.

The daytime running lights illuminate when the following conditions are met.

·

The ignition switch is ON.

·

An engine speed signal is input.

·

The headlight dimmer switch assembly is in the off or AUTO position (and the taillights are not turned on via the automatic light control system).

·

The parking brake switch assembly is off.