Home › Engine / Hybrid System › 2AR-FXE ENGINE MECHANICAL › ENGINE UNIT › from 2016.05
NM2040EQ _51 Engine / Hybrid System _014484 2AR-FXE ENGINE MECHANICAL _0073581 ENGINE UNIT GE GENERAL F

2AR-FXE ENGINE MECHANICAL  ENGINE UNIT  GENERAL  GENERAL  


OUTLINE


a.

The 2AR-FXE engine is an in-line 4-cylinder, 2.5 liter, 16 valve DOHC engine. This engine uses a Variable Valve Timing-intelligent (VVT-i) system, Direct Ignition System (DIS), Electronic Throttle Control System-intelligent (ETCS-i) and Exhaust Gas Recirculation (EGR) system. These control functions achieve improved engine performance, fuel economy, and clean emissions.

W105426



SPECIFICATION


Engine Type 2AR-FXE

*1: Similar high quality ethylene glycol based non-silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology. (Coolant with long-life hybrid organic acid technology consists of a combination of low phosphates and organic acids.)

*2: The figure shown is the weight of the part without coolant and oil.

No. of Cyls. & Arrangement 4-cylinder, In-line
Valve Mechanism 16-valve DOHC, Chain Drive
(With VVT-i)
Combustion Chamber Pentroof Type
Flow of Intake and Exhaust Gasses Cross-flow
Fuel System SFI
Ignition System DIS
Displacement cm3 (cu. in.) 2494 (152.2)
Bore X Stroke mm (in.) 90.0 X 98.0 (3.54 X 3.86)
Compression Ratio 12.5 : 1
Max. Output (EEC) kW@rpm 118@5700
Max. Torque (EEC) N*m@rpm 213@4500
Oil Capacity Dry liters (US qts, Imp. qts) 5.3 (5.6, 4.7)
With Oil Filter liters (US qts, Imp. qts) 4.4 (4.6, 3.9)
Without Oil Filter liters (US qts, Imp. qts) 4.0 (4.2, 3.5)
Oil Grade API grade SL "Energy-Conserving", SM "Energy-Conserving", SN "Resource-Conserving" or ILSAC multigrade engine oil
Engine Coolant Type TOYOTA Genuine Super Long Life
Coolant or the following*1
Capacity liters (US qts, Imp. qts) 7.8 (8.2, 6.9)
Spark Plug Type DENSO Made FK16HR-A8 (Iridium)
Plug Gap mm (in.) 0.7 to 0.8 (0.0276 to 0.0315)
Firing Order 1 - 3 - 4 - 2
Fuel Octane Number 91 or higher
Emission Regulation EURO V
Engine Service Mass*2 (Reference) kg (lb) 131 (288.8)

W107390E01
5.517,0.627 5.780,0.785 0.263,0.157 10 120 5.517,1.314 5.780,1.472 0.263,0.157 10 100 5.517,1.996 5.703,2.154 0.185,0.157 10 80 5.517,2.671 5.703,2.829 0.185,0.157 10 60 5.517,3.341 5.703,3.499 0.185,0.157 10 40 5.517,4.021 5.703,4.179 0.185,0.157 10 20 5.517,4.715 5.625,4.878 0.107,0.163 10 0 5.537,0.324 5.858,0.486 0.321,0.162 10 (kW) 5.832,2.399 6.324,2.557 0.492,0.158 10 Output 1.589,1.847 1.852,2.004 0.263,0.157 10 220 1.589,2.538 1.852,2.696 0.263,0.157 10 180 1.589,2.876 1.852,3.034 0.263,0.157 10 160 1.517,1.493 1.901,1.658 0.383,0.165 10 (N*m) 1.044,2.535 1.557,2.706 0.513,0.171 10 Torque 1.589,2.208 1.852,2.366 0.263,0.157 10 200 2.282,5.128 2.629,5.288 0.347,0.160 10 1000 2.706,5.128 3.052,5.288 0.347,0.160 10 2000 3.121,5.128 3.467,5.288 0.347,0.160 10 3000 3.544,5.128 3.891,5.288 0.347,0.160 10 4000 3.973,5.128 4.320,5.288 0.347,0.160 10 5000 4.4,5.128 4.747,5.288 0.347,0.160 10 6000 4.818,5.128 5.165,5.288 0.347,0.160 10 7000 3.238,5.399 4.140,5.567 0.902,0.168 10 Engine Speed 5.224,5.128 5.580,5.276 0.356,0.148 10 (rpm) 1.589,3.214 1.852,3.372 0.263,0.157 10 140


MAIN FEATURES


a.

The 2AR-FXE engine has achieved the following performance through the use of the items listed in the table below.

i.

High performance and reliability


ii.

Low noise and vibration


iii.

Lightweight and compact design


iv.

Good serviceability


v.

Clean emissions and fuel economy

Item (1) (2) (3) (4) (5)
Engine Proper A cylinder head cover sub-assembly made of magnesium alloy is used. ○
A taper squish shape is used for combustion chambers. ○ ○
Spiny-type liners are used in the cylinder bores. ○ ○ ○
A water jacket spacer is used. ○ ○
The piston skirt is coated with resin. ○ ○ ○
Low tension piston rings are used. ○ ○
A resin gear engine balancer assembly is used. ○ ○
Valve Mechanism The Variable Valve Timing-intelligent (VVT-i) system is used. ○ ○
A chain sub-assembly and No. 1 chain tensioner assembly are used. ○ ○
Valve lash adjuster assemblies are used. ○ ○ ○
No. 1 valve rocker arm sub-assemblies are used. ○ ○
Lubrication System An oil filter with a replaceable element is used. ○
Cooling System TOYOTA Genuine Super Long Life Coolant (SLLC) is used. ○
Intake and Exhaust System An intake manifold made of plastic is used. ○
A linkless type throttle with motor body assembly is used. ○ ○
A stainless steel exhaust manifold sub-assembly is used. ○ ○
A step motor type Exhaust Gas Recirculation (EGR) valve is used. ○ ○
A water-cooled type Exhaust Gas Recirculation (EGR) cooler is used. ○ ○
An ultra thin-wall, high-cell density ceramic type Three-Way Catalytic converter (TWC) is used. ○
Fuel System A fuel returnless system is used. ○ ○ ○
Quick connectors are used to connect the fuel hoses with the fuel pipes. ○
Compact 12-hole type fuel injector assemblies are used. ○ ○
Ignition System The Direct Ignition System (DIS) is used. ○ ○ ○ ○
Long-reach type iridium-tipped spark plugs are used. ○ ○ ○
Engine Control System A Magnetic Resistance Element (MRE) type camshaft position sensor is used. ○ ○
The Electronic Throttle Control System-intelligent (ETCS-i) is used. ○ ○
An evaporative emission control system is used. ○