| Item | Specified Condition |
|---|---|
| Standard value (for brand-new cap) | 94 to 122 kPa (1.0 to 1.2 kgf/cm2, 13.6 to 17.7 psi) |
| Minimum standard value (for used cap) | 94 kPa (1.0 kgf/cm2, 13.6 psi) |
| Item | Tester Connection | Specified Condition |
| IGCT relay
Resistance |
3 - 5 | 10 kΩ or higher
(Auxiliary battery voltage is not applied across terminals 1 and 2) |
| 3 - 5 | Below 1 Ω
(Auxiliary battery voltage is applied across terminals 1 and 2) |
|
| INV W/ PMP relay
Resistance |
3 - 5 | 10 kΩ or higher
(Auxiliary battery voltage is not applied across terminals 1 and 2) |
| 3 - 5 | Below 1 Ω
(Auxiliary battery voltage is applied across terminals 1 and 2) |
| SMRB
Resistance |
A-1 (+) - Q2-1 (CBI) | 10 kΩ or more
(Auxiliary battery voltage is not applied between terminals O9-1 (SMRB) and O9-2 (GND)) |
| A-1 (+) - Q2-1 (CBI) | Below 1 Ω
(Auxiliary battery voltage is applied between terminals O9-1 (SMRB) and O9-2(GND)) |
|
| O9-1 (SMRB) - O9-2 (GND) | 25.0 to 59.0 Ω at -40 to 80°C (-40 to 176°F) | |
| SMRG
Resistance |
q1-1(-) - Q3- 1(CEI) | 10 kΩ or more
(Auxiliary battery voltage is not applied between terminals O9- 3(SMRG) and O9-2(GND)) |
| q1-1(-) - Q3- 1(CEI) | Below 1 Ω
(Auxiliary battery voltage is applied between terminals O9-3(SMRG) and O9-2(GND)) |
|
| O9-3(SMRG) - O9-2(GND) | 25.0 to 59.0 Ω at -40 to 80°C (-40 to 176°F) | |
| SMRP
Resistance |
q1-1(-) - Q3- 1(CEI) | 10 kΩ or more
(Auxiliary battery voltage is not applied between terminals O9- 4(SMRP) and O9-2(GND)) |
| q1-1(-) - Q3- 1(CEI) | 28.5 to 31.5 Ω
(Auxiliary battery voltage is applied between terminals O9-4(SMRP) and O9-2(GND)) |
|
| O9-4(SMRP) and O9-2(GND) | 112 to 274 Ω at -40 to 80°C (-40 to 176°F) |
| Pattern select switch assembly
Resistance |
L128-4 (S) - L128-1 (E) | Below 1 Ω
(Pattern select switch assembly operated) |
| L128-4 (S) - L128-1 (E) | 10 kΩ or more
(Pattern select switch assembly operated) |
| Service plug grip | - | Below 1 Ω |
| Capacity | Classification |
|---|---|
| 3.2 liters (3.4 US qts, 2.8 Imp. qts) | Use only "TOYOTA Super Long Life Coolant" or similar high quality ethylene glycol based non-silicate, non-amine, non-nitrite, non-borate coolant with long-life hybrid organic acid technology (coolant with long-life hybrid organic acid technology consists of a combination of low phosphates and organic acids). |