Home › General › SPECIFICATIONS › 2AR-FXE COOLING
RM2040EQ _V1 General _014689 SPECIFICATIONS _0074824 2AR-FXE COOLING F

SPECIFICATIONS  2AR-FXE COOLING  SERVICE DATA  


THERMOSTAT
Condition Specified Condition
Standard valve opening temperature 80 to 84°C (176 to 183°F)
Standard valve lift 10 to 11.3 mm (0.394 to 0.445 in.) at 95°C (203°F)

COOLING FAN MOTOR
Item Condition Specified Condition
Cooling fan motor Auxiliary battery voltage applied at 20°C (68°F) 10.6 to 16.6 A
No. 2 cooling fan motor Auxiliary battery voltage applied at 20°C (68°F) 10.6 to 16.6 A

COOLING FAN RELAY
Item Tester Connection Specified Condition
Cooling fan relay 3 - 5 10 kΩor higher
(Battery voltage is not applied between terminals 1 and 2)
3 - 5 Below 1 Ω
(Battery voltage is applied between terminals 1 and 2)

RADIATOR
Item Condition Specified Condition
Radiator cap Standard value (for brand-new cap) 93.3 to 122.7 kPa (1.0 to 1.3 kgf/cm2, 13.5 to 18.0 psi)
Minimum standard value (for used cap) 78.5 kPa (0.8 kgf/cm2, 11.4 psi)

COOLANT
Capacity Classification
7.8 liters (8.2 US qts, 6.9 Imp. qts) Use only "TOYOTA Super Long Life Coolant", or similar high qualityethylene glycol based non-silicate, non-amine, non-nitrite, and nonboratecoolant with long-life hybrid organic acid technology (coolantwith long-life hybrid organic acid technology is a combination of lowphosphates and organic acids).