Home › Engine / Hybrid System › 2AR-FXE ENGINE CONTROL › MASS AIR FLOW METER
RM2040EQ _51 Engine / Hybrid System _014691 2AR-FXE ENGINE CONTROL _0074876 MASS AIR FLOW METER A

2AR-FXE ENGINE CONTROL  MASS AIR FLOW METER  INSTALLATION  


PROCEDURE

Hide 22204 1.INSTALL MASS AIR FLOW METER SUB-ASSEMBLY

a.

Install the mass air flow meter sub-assembly with the 2 screws.

NOTICE:

Make sure that the O-ring is not cracked or jammed when installing the mass air flow meter.


HINT:

Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.

Click hereEngine / Hybrid System>2AR-FXE ENGINE CONTROL>SFI SYSTEM>INITIALIZATION



b.

Connect the mass air flow meter connector.