The power management control ECU monitors its internal operation and it will set this DTC when it detects an internal malfunction. If this DTC is output, replace the power management control ECU.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Warning Indicate |
|---|---|---|---|---|---|
| P060B-134 | Internal Control Module A/D Processing Performance | ECU internal error | Power management control ECU | Comes on | Master Warning Light:
Comes on |
| P060B-135 | Internal Control Module A/D Processing Performance | ECU internal error | Power management control ECU | Comes on | Master Warning Light:
Comes on |
| P060B-570 | Internal Control Module A/D Processing Performance | ECU internal error | Power management control ECU | Comes on | Master Warning Light:
Comes on |
| P062F-143 | Internal Control Module EEPROM Error | ECU internal error | Power management control ECU | Comes on | Master Warning Light:
Comes on |
(Click here Power Source / Network>POWER DISTRIBUTION>POWER MANAGEMENT CONTROL ECU>COMPONENTS)
| Proceed to |
|---|
| NEXT |
NEXT