Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › ACCELERATOR PEDAL SENSOR
RM2040EQ _51 Engine / Hybrid System _014692 HYBRID / BATTERY CONTROL _0074894 ACCELERATOR PEDAL SENSOR A

HYBRID / BATTERY CONTROL  ACCELERATOR PEDAL SENSOR  INSTALLATION  


PROCEDURE

Hide 78110K 1.INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY

NOTICE:
·

Avoid physical shock to the accelerator pedal sensor assembly.

·

Do not disassemble the accelerator pedal sensor assembly.

·

The accelerator pedal sensor assembly does not require lubrication.

·

Do not apply oil or other lubricants to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.



a.
A275159
1.083,1.344 1.208,1.521 0.125,0.177 10 true 1 2.458,0.781 2.594,0.99 0.135,0.208 10 true 2

Temporarily install the accelerator pedal sensor assembly with the 2 bolts.


b.

Tighten the 2 bolts in the order shown in the illustration.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


c.

Connect the connector.