Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › ACCELERATOR PEDAL SENSOR
RM2040EQ _51 Engine / Hybrid System _014692 HYBRID / BATTERY CONTROL _0074894 ACCELERATOR PEDAL SENSOR A

HYBRID / BATTERY CONTROL  ACCELERATOR PEDAL SENSOR  REMOVAL  


PROCEDURE

Hide 78110K 1.REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

NOTICE:
·

Avoid physical shock to the accelerator pedal sensor assembly.

·

Do not disassemble the accelerator pedal sensor assembly.

·

The accelerator pedal sensor assembly does not require lubrication.

·

Do not apply oil or other lubricants to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.



a.
A275159

Disconnect the connector.


b.

Remove the 2 bolts and accelerator pedal sensor assembly.