78110K
1.INSPECT ACCELERATOR PEDAL SENSOR ASSEMBLY
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Enter the following menus: Powertrain / Hybrid Control / Data List / Accel Pedal Pos #1, Accel Pedal Pos #2.
| Tester Display |
|---|
| Accel Pedal Pos #1 |
| Accel Pedal Pos #2 |
Read the Data List.
| Tester Display | Accelerator Pedal Condition | Specified Condition |
|---|---|---|
| Accel Pedal Pos #1 | Not depressed | 8 to 28% |
| Fully depressed | 62 to 92% | |
| Not depressed → Fully depressed → Not depressed (Accelerator pedal should be operated slowly) | Value changes progressively | |
| Accel Pedal Pos #2 | Not depressed | 20 to 44% |
| Fully depressed | 78 to 100% | |
| Not depressed → Fully depressed → Not depressed (Accelerator pedal should be operated slowly) | Value changes progressively |