Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › SERVICE PLUG GRIP
RM2040EQ _51 Engine / Hybrid System _014692 HYBRID / BATTERY CONTROL _0074898 SERVICE PLUG GRIP G

HYBRID / BATTERY CONTROL  SERVICE PLUG GRIP  INSPECTION  


PROCEDURE

Hide G3834 1.INSPECT SERVICE PLUG GRIP

a.
A258776

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
Service plug grip Always Below 1 Ω


If the result is not as specified, replace the service plug grip.