Home › Engine / Hybrid System › 2AR-FXE FUEL › FUEL SENDER GAUGE ASSEMBLY
RM2040EQ _51 Engine / Hybrid System _014694 2AR-FXE FUEL _0074914 FUEL SENDER GAUGE ASSEMBLY G

2AR-FXE FUEL  FUEL SENDER GAUGE ASSEMBLY  INSPECTION  


PROCEDURE

Hide 83320 1.INSPECT FUEL SENDER GAUGE ASSEMBLY

a.
A259312
0.104,0.031 1.948,1.552 1.844,1.521 1.781,2.24 0.729,2.24 false 1.333,3.844 0.729,3.844 false 0.208,0.073 0.479,0.25 0.271,0.177 10 false *a 0.635,2.188 0.844,2.417 0.208,0.229 10 false F 0.615,3.781 0.813,4.01 0.198,0.229 10 false E
*a Front view of wire harness connector
(to Fuel Sender Gauge Assembly)


Check that the float moves smoothly between F and E.


b.

Measure the resistance between the terminals 1 and 2 of connector according to the value(s) in the table below.

Standard Resistance:
Float Level Resistance (Ω)
F 13.5 to 16.5
Between E and F 13.5 to 414.5 (Gradually changes)
E 405.5 to 414.5


If the value is not as specified, replace the fuel sender gauge assembly.