Home › Engine / Hybrid System › 2AR-FXE EMISSION CONTROL › PURGE VALVE
RM2040EQ _51 Engine / Hybrid System _014695 2AR-FXE EMISSION CONTROL _0074920 PURGE VALVE A

2AR-FXE EMISSION CONTROL  PURGE VALVE  INSTALLATION  


PROCEDURE

Hide 25804A 1.INSTALL PURGE VSV

a.

Install the fuel vapor feed hose to the purge VSV.


b.

Install the purge VSV to the No. 1 air cleaner hose.


c.
A262525
0.911,3.412 1.073,3.568 0.162,0.156 10 *1 1.892,3.858 2.055,4.014 0.162,0.156 10 *a 1.481,3.496 1.097,3.496 false
*1 Retainer
*a Push


Connect the 2 fuel vapor feed hoses.

NOTICE:
·

Check that there are no scratches or foreign matter around the connected part of the fuel tube connector and pipe before performing this work.

·

Connect the quick connector and push the retainer in until the retainer makes a "click" sound to lock the claws of the retainer.

·

After connecting the fuel vapor feed hose to the fuel tube connector, check that the fuel vapor feed hose is securely connected by pulling on the fuel tube connector and the fuel vapor feed hose.




d.

Connect the wire harness clamp and connector.