Home › Engine / Hybrid System › 2AR-FXE EMISSION CONTROL › PURGE VALVE
RM2040EQ _51 Engine / Hybrid System _014695 2AR-FXE EMISSION CONTROL _0074920 PURGE VALVE A

2AR-FXE EMISSION CONTROL  PURGE VALVE  REMOVAL  


PROCEDURE

Hide 25804A 1.REMOVE PURGE VSV

a.
A258670

Disconnect the connector and wire harness clamp.


b.

Disconnect the 2 fuel vapor feed hoses.

A306198
2.771,2.365 2.51,2.365 2.51,2.365 2.729,1.521 false 3.219,2.167 3.417,2.167 3.417,2.167 3.229,1.354 false 1.313,1.146 1.854,1.146 false 0.625,2.333 0.625,1.813 false 1.615,2.188 1.615,1.667 false 0.74,1.156 0.969,0.458 0.969,0.458 1.115,0.458 false 3.333,0.802 3.646,1 0.313,0.198 10 false *a 2.448,0.792 2.76,0.99 0.313,0.198 10 false *a 3.083,1.813 3.396,2.01 0.313,0.198 10 false *b 2.823,2.281 3.135,2.479 0.313,0.198 10 false *1 3.052,2.083 3.365,2.281 0.313,0.198 10 false *2 1.917,1.052 2.229,1.25 0.313,0.198 10 false *1 0.573,2.396 0.885,2.594 0.313,0.198 10 false *2 1.563,2.24 1.875,2.438 0.313,0.198 10 false *3 1.167,0.365 1.479,0.563 0.313,0.198 10 false *4
*1 Retainer *2 Fuel Tube Connector
*3 Pipe *4 O-ring
*a Pinch *b Pull


NOTICE:
·

Remove any dirt or foreign matter on the fuel tube connector before performing this work.

·

Do not allow any scratches or foreign matter to get on the parts when disconnecting them as the fuel tube connector has an O-ring that seals the pipe.

·

Perform this work by hand. Do not use any tools.

·

Protect the disconnected parts by covering them with plastic bags after disconnecting each fuel vapor feed hose.




c.

Remove the purge VSV from the No. 1 air cleaner hose.


d.
A258714

Remove the fuel vapor feed hose from the purge VSV.