53851Z
1.REMOVE FRONT WHEEL OPENING EXTENSION PAD RH
51441C
2.REMOVE ENGINE UNDER COVER RH
53852K
3.REMOVE FRONT WHEEL OPENING EXTENSION PAD LH
51442C
4.REMOVE ENGINE UNDER COVER LH
17410
5.REMOVE FRONT EXHAUST PIPE ASSEMBLY
Disconnect the heated oxygen sensor connector.
Remove the 2 bolts, 2 compression springs and 2 nuts.
Remove the front exhaust pipe assembly from the exhaust pipe support.
Remove the 2 gaskets from the exhaust manifold converter sub-assembly and front exhaust pipe assembly.
17167
6.REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR
Remove the 4 bolts and No. 1 exhaust manifold heat insulator.
89467B
7.REMOVE AIR FUEL RATIO SENSOR
25586
8.REMOVE NO. 1 MANIFOLD CONVERTER INSULATOR
Remove the 3 bolts and No. 1 manifold converter insulator.
25612
9.REMOVE NO. 2 EGR PIPE
Remove the 2 bolts, 2 nuts and No. 2 EGR pipe.
Remove the 2 gaskets.
17139
10.REMOVE NO. 2 MANIFOLD STAY
Remove the bolt, nut and No. 2 manifold stay.
17118
11.REMOVE MANIFOLD STAY
Remove the bolt, nut and manifold stay.
25051
12.REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY
Remove the 5 nuts and exhaust manifold converter sub-assembly.
Remove the gasket.
17168
13.REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR
Remove the 2 bolts and No. 2 exhaust manifold heat insulator.