Home › Engine / Hybrid System › 2AR-FXE COOLING › RELAY
RM2040EQ _51 Engine / Hybrid System _014697 2AR-FXE COOLING _0074935 RELAY G

2AR-FXE COOLING  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85927 1.INSPECT FAN RELAY

a.
A260082

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Auxiliary battery voltage is not applied between terminals 1 and 2 10 kΩ or higher
3 - 5 Auxiliary battery voltage is applied between terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the relay.