Home › Drivetrain › P314 HYBRID TRANSMISSION / TRANSAXLE › SHIFT LEVER POSITION SENSOR
RM2040EQ _52 Drivetrain _014701 P314 HYBRID TRANSMISSION / TRANSAXLE _0074953 SHIFT LEVER POSITION SENSOR N

P314 HYBRID TRANSMISSION / TRANSAXLE  SHIFT LEVER POSITION SENSOR  ADJUSTMENT  


PROCEDURE

Hide 89451 1.INSPECT SHIFT LEVER POSITION SENSOR POSITION

a.

Apply the parking brake.


b.

Lock the wheels with chocks to secure the vehicle.


c.

Turn the power switch on (READY).


d.

Move the shift lever to D and release the brake.

NOTICE:

Be sure to apply the parking brake and lock the wheels with chocks to secure the vehicle.



e.
C259244C01
0.459,1.371 0.646,1.524 0.188,0.153 10 *a 0.459,2.024 0.646,2.177 0.188,0.153 10 *a 0.461,1.7 0.649,1.853 0.188,0.153 10 *b 1.163,2.235 1.379,2.388 0.216,0.153 10 (A) 1.159,1.182 1.375,1.335 0.216,0.153 10 (B) 1.491,1.518 1.422,0.842 1.422,0.842 1.336,0.842 false 1.137,0.741 1.325,0.894 0.188,0.153 10 *c 1.137,2.631 1.325,2.784 0.188,0.153 10 *d 1.491,2.049 1.422,2.725 1.422,2.725 1.336,2.725 false
*a Gear Disengagement Point
*b N Position
*c R Position
*d D Position


Slowly move the shift lever to N and measure moving distance (A) of the shift lever from the original point to the gear disengagement point.

NOTICE:

Be sure to move the shift lever slowly.



f.

Move the shift lever to R and release the brake.

NOTICE:

Be sure to apply the parking brake and lock the wheels with chocks to secure the vehicle.



g.

Slowly move the shift lever to N and measure moving distance (B) of the shift lever from the original point to the gear disengagement point.

NOTICE:

Be sure to move the shift lever slowly.



h.

Check that moving distances (A) and (B) shown in the illustration are almost the same.

HINT:
·

If moving distances (A) and (B) are almost the same, adjustment of the shift lever position is not necessary.

·

If moving distance (A) is shorter than (B), perform adjustment of the shift lever position [*1].

·

If moving distance (B) is shorter than (A), perform adjustment of the shift lever position [*2].




Hide 89451 2.ADJUST SHIFT LEVER POSITION SENSOR POSITION

a.

If moving distance (A) is shorter than (B). [*1]

HINT:

If the shift lever is moved from R to N, the moving distance of the shift lever from the original point to the gear disengagement point becomes longer.


i.

Move the shift lever to N.


ii.
C245022

Loosen the 2 bolts.


iii.
C207144

Slightly turn the shift lever position sensor counterclockwise.


iv.
C245022N02
0.656,1.521 0.823,1.708 0.167,0.188 10 true 1 2.292,0.406 2.469,0.583 0.177,0.177 10 true 2

Tighten the 2 bolts in the order shown in the illustration.

Torque:
13 N*m (133 kgf*cm, 10 ft.*lbf)


v.

Recheck the shift lever position sensor.



b.

If moving distance (B) is shorter than (A). [*2]

HINT:

If the shift lever is moved from D to N, the moving distance of the shift lever from the original point to the gear disengagement point becomes longer.


i.

Move the shift lever to N.


ii.
C245022

Loosen the 2 bolts.


iii.
C207145

Slightly turn the shift lever position sensor clockwise.


iv.
C245022N02
0.656,1.521 0.823,1.708 0.167,0.188 10 true 1 2.292,0.406 2.469,0.583 0.177,0.177 10 true 2

Tighten the 2 bolts in the order shown in the illustration.

Torque:
13 N*m (133 kgf*cm, 10 ft.*lbf)


v.

Recheck the shift lever position sensor.